FC1500-85-2XV Dual Venturi 12x Chamber Fuel Tank

Product Code: FC1500-85-2XV

$USD 3,727.50

Product total
Options total
Grand total

Fuel Pump Hanger (FC1500-2XV-S Dual Venturi & Surge Tank) Single, Twin & Triple Fuel PumpFuel Pump Hanger (FC1500-2XV-S Dual Venturi & Surge Tank) Single, Twin & Triple Fuel Pump

FC1500-85-2XV Fuel Tank Filler Options

Option A

(Fuel Cap)


  • DEFAULT OPTION (FREE); For those that wish to fill directly via the FC1500 fuel pump hanger

Option B

(Hose Adapter)


  • For those that wish to remote fill; compatible with a 54mm ID fuel hose

Option C

(24AN Adapter)


FC1500-85-2XV Fuel Tank Special Features

Single Fuel Pump Port

  • 8AN fuel ports

  • Perfect fuel pressure control

  • Staged fuel pump operation

  • Superior fuel pressure stability due to our design protected 3-to-1 fuel pump manifold

Dual Venturi Pump
  • The FC1500-75-2XV (2x Venturi) is the worlds first fuel tank  to feature Dual Venturi Vacuum Pumps.
  • Developed in-house using leading CFD modelling software and techniques (200 data points, 250 man hours and 90 hours of continuous simulation)
  • The Dual Venturi Vacuum Pumps require no wiring, draw no current yet is able to generate enough vacuum to pull through, using two billet 3/8 quick connect fittings attached to the rear left/right chambers, more than 220 litres per hour of fuel into the billet tubes and deliver fuel into the fuel pump pick-up zone to ensure that the fuel pumps are submerged at all times and there is no possibility of fuel starvation or fuel surge.

 12 Chambers

  • This is the only production fuel tank which features 12 individual fuel chambers, similar to Formula 1, designed to provide superior baffling and surge protection under heavy acceleration, braking and cornering and eliminates the requirement for an external surge tank.
  • Dimensions (mm): 650x550x250
  • 85 litre or 22.45 gallon capacity (Walbro & Bosch fuel pump displacement is approximately 300ml per fuel pump)
Dual Vent/Breather
  • Dual 8AN vent/breather port for maximum venting under heavy load
  • Note: it is advised that tank is vented to charcoal canister and NOT atmosphere
Plug & Play
  • The FC1500-85-2XV features the Aftermarket Industries 6 way 30A (per pin) Plug & Play electrical connector to allow independent control of up to three fuel pumps.

Wiring Recommendation: Required For WARRANTY

Fuel Pump Qty Main Power Wire

Fuel Pump Power Wire

Relay Wire Size

Relay Size Fuel Pump Circuit Breaker
Single Pump 10 AWG Tefzel Mil-Spec 22759/34 10 AWG Tefzel Mil-Spec 22759/34 16 AWG Tefzel Mil-Spec 22759/16 50A

30A Circuit Breaker or Fuse

Twin Pump 4 AWG (75A) Main Wire Tefzel Mil-Spec 22759/16 (60A Type 1 Circuit Breaker) 10 AWG Tefzel Mil-Spec 22759/34 16 AWG Tefzel Mil-Spec 22759/16 50A 30A Circuit Breaker or Fuse
Triple Pump 2 AWG (90A) Main Wire Tefzel Mil-Spec 22759/16 (80A Type 1 Circuit Breaker) 10 AWG Tefzel Mil-Spec 22759/34 16 AWG Tefzel Mil-Spec 22759/16 50A 30A Circuit Breaker or Fuse
  • Electrical Wire & Circuit Size Formula
    • Circuit Breaker/Fuse Size: 125% (1.25x) total Peak Current (Amps)
      • ​Circuit Breaker/Fuse must NOT exceed wire current rating
    • Wire Size: 150% (1.5x) total Peak Current (Amps)
    • Relay Size: 225% (2.25x) total Peak Current (Amps)

Bio-Fuel Compatible

  • Zero fuel vapour loss

  • Zero fuel smell GUARANTEED due to anodising process

  • Unleaded, Ethanol, C16


  • Fuel Tank & Brackets: Laser cut & CNC folded 5052 grade aluminium - dimensions (mm): 650x550x250

  • 85 litre capacity (Walbro & Bosch fuel pump displacement is approximately 300ml per fuel pump)

  • Billet Components: Machined from aerospace grade 6061-T6 billet aluminium, designed using best practice engineering principles and stress tested to ensure maximum safety for all motorsport applications

Compatible Fuel Pumps

  • Walbro 255

  • Walbro 460

  • Walbro 520 / 525

  • Bosch BR540 (RECOMMENDED)

  • please select either the Walbro or Bosch fuel bracket from the AVAILABLE OPTIONS above - "Fuel Pump Bracket"
  • PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump" or "Bosch Fuel Pump".

Power Support Table

 Fuel Type
 Fuel Pump
 Power HP*
 Pressure PSI**
 1x Walbro 460
 1x Bosch B540
 2x Walbro 460
 2x Bosch BR540
 3x Bosch BR540
 *BASE FUEL PRESSURE MUST BE SET @ 50 PSI OR LOWER  (Recommended Fuel Injector: Bosch Motorsport 1650Ccc)  **Maximum Peak Fuel Pressure (Base Pressure + Boost Pressure)

***Maximum Voltage

*Rotary Engine: Reduce Power Support Figures by 30%

Need a Fuel Level Sender? Select from the AVAILABLE OPTIONS above "Fuel Level Sender".


FuelSale Fuel Sender

Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above "Fuel Pressure Regulator".

Need the Correct Electrical Connector? High current draw fuel pumps that require a high performance external e85 electrical connector. We've developed our own as the OEM Delphi Apex 2.8mm 6 way connector are NOT e85 compatible - two (2) connectors are required and ARE included FREE (includes 6x 10 AWG (30A) Metri-Pack 280 series pins per connector and is designed SPECIFICALLY for 10 AWG (30A) Tefzel Mil-Spec 22759/34 wire.

Aftermarket Industries 6 Way Connector (Female)

Need Power? Aftermarket Industries now offers a motorsport-grade Power Distribution Kit for up to 3 pumps (photo below is for promotional purposes only - kit requires assembly, cut & crimp) see AVAILABLE OPTIONS above - "Power Distribution Kit" (Select 2 Way/Dual Fuel Pump or 3 Way/Triple Fuel Pump)

  • Package Includes
    • Bussman three way Power Distribution Unit (cavity plugs/cable seals/pins)
    • Low profile laser cut & CNC folded mounting bracket (supplied in black finish)
    • 2-3x 50A mini relays
    • 2-3x 30A circuit breakers (based on your specific targets - Aftermarket Industries will reach out to you directly)
    • 8m 10 AWG (30A) Tefzel Mil-spec 22759/34 fuel pump power & ground wire
    • 8m 16 AWG (15A) Tefzel Mil-sec 22759/16 relay signal & ground wire
    • 1x Delphi 280 (30A) series 3 way fuel pump power connector & 10 AWG (30A) pins
    • 1x Delphi 280 (30A) series 3 way relay signal power connector & 16 AWG (15A) pins
    • 1x crimping tool
    • 1x 21 inch 2-4 AWG (75-90A) Tefzel Mil-Spec 22759/16 PDU power cable & 80A type 2 circuit breaker
    • 1x 6 inch 2-4 AWG (75-90A) Tefzel Mil-Spec 22759/16 PDU ground cable


​Need a Hobbs Switch? Fuel pump operation MUST be staged via a Hobbs Pressure Switch, Aftermarket ECU or PDM. See AVAILABLE OPTIONS above - "Hobbs Switch"


  • 4 PSI Hobbs  Switch
  • 24" inch harness with 2x female Delphi 280 Series Connectors & 1x male Delphi 280 Series Connector (includes pins)

Hobbs Pressure Switch

Need a Stainless Steel Fuel Filter (Walbro Pumps Only)? Aftermarket Industries developed the first and only 200  micron fuel filter / strainer designed for motorsport conditions and bio-fuels such as ethanol (e85): see AVAILABLE OPTIONS above - "Stainless Steel Walbro Fuel Filter" (select the desired quantity)

Package includes the following items:

  • 85 Litre Fuel Tank

  • Billet FC1500 hanger (8AN ports)

  • 6 way 90 degree male electrical connector kit (2x female connectors, 12x pins, circlip and o-ring)

  • Billet Triple fuel pump bracket (includes stainless steel fasteners and viton rubber insert) - please select either the Walbro or Bosch fuel pump bracket kit

  • Two (2) billet swivel fittings

  • Dual billet venturi vacuum pump kit (includes two (2) 3/8 billet quick connect fittings, four (4) 90 degree plastic quick connect hose adapters & two (2) 250mm e85 flexible corrugated hose kits with four (4) stainless steel hose clamps pre-assembled)

  • Baffle plate kit (includes two billet baffle plate adapters, laser cut baffle plate and stainless steel fasteners)

Installation Notes (Connectors):

  • Requires 10-12 AWG Metri-Pack Crimp Tool (not included - see AVAILABLE OPTIONS above - Crimp Tool)
    • ​strip wire insulation completely to ensure correct clearance once pins are crimped​​

​​The following video is for illustrative purposes ONLY and does not depict the actual crimp tool available.


Is all this too overwhelming? Don't worry, you're not alone!


Fuel System Advice (FREE)

*These products are designed for race use only and must be correctly fitted by licenced automotive professionals or workshops. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*These tanks MUST not vent to the atmosphere AND is a fire hazard; a charcoal cannister.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Product Specifications

Weight 15 kg
Dimensions 65 × 55 × 25 cm


There are no reviews yet.

Be the first to review “FC1500-85-2XV Dual Venturi 12x Chamber Fuel Tank”

Your email address will not be published. Required fields are marked *

    Your Cart
    Your cart is emptyReturn to Shop