Tefzel Mil-Spec 10 AWG Wire 22759/34

*AVAILABLE IN WHITE ONLY

Priced per meter; for additional lengths please see "AVAILABLE OPTIONS" - "Wire Length" (ONLY AVAILABLE IN WHITE)

• Wholesale & Trade Enquiries: Please complete the CONTACT FORM

Tefzel® is a Fluoropolymer Cross-linked Modified (ETFE) insulation. Tefzel® is light, thin, resistant to abrasion, fuel, most chemicals, cuts and oil. It's designed for aerospace applications where dimensional tolerance, weight, and mechanical durability are required. The insulation is rated to 150°C (302°F). This wire exhibits high chemical and radiation resistance.

Tefzel is used in aerospace and motorsports applications due to its light weight, tight-diameter tolerances, and enhanced mechanical toughness.

22759/34 being a single conductor electrical wire, has variations in constructions like the tin, nickel or silver-plated copper conductors. The different conductor constructions enable the 22759/34 wire to be used in varying temperatures and environments

22759/16 versus 16878

22759 has a more extensive selection of fluoropolymer insulation constructions, because of the applications the 22759 cables are subject too. Mil-W-22759 (m22759) or SAE AS22759 is constantly relied on for military, aerospace and defence agency applications. The m22759 is designed for high-performance and meets the requirements for low weight, high-temperature resistance, low flame and small dimension installations.

Key Features

• Weight and space savings over extruded insulation
• Exceptional resistance to scrape abrasion
• Exceptional laser markability
• Exceptional hydrolytic resistance
• Exceptional electrical arc scrape abrasion track resistance
• Exceptional layer-to-layer adhesion
• Exceptional low outgassing characteristics

Product Construction

Conductor	Stranded nickel
Insulations and jacket	PTFE/polyimide/PTFE and Seamless PTFE tape

---

Mechanical/Environmental Performance

Electrical Performance:
Voltage	600 V
DC Resistance	1.26 to 41.3 ohms per 1000 ft
Amp Rating	35A (Continuous)
Attenuation	NA
Mechanical Specifications:
Weight/K ft	32.4 lbs per 1000 ft
Size (mm)	2.87 (Strand) : 3.4 (Finished Wire)
Min. Bend Radius	NA
Operating Temperature	-55 to 150C
Stranding	37x26

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: