Loading...

NEED HELP WITH YOUR PROJECT?

Fuel Pump Hanger (FC1500-2XV Dual Venturi) Single, Twin & Triple Fuel Pump

Product Code: FC1500-2XV

$USD 1,593.95

Product total
Options total
Grand total

FC1500-2XV Billet Oval Fuel Pump Hanger Filler Options

Option A

(Fuel Cap)

$0

  • DEFAULT OPTION (FREE): For those that wish to fill directly via the FC1500 fuel pump hanger

Option B

(Hose Adapter)

$145

  • For those that wish to remote fill; compatible with a 54mm ID fuel hose

Option C

(24AN Adapter)

$145

  • For those that wish to remote fill; compatible with the Earls -24AN fuel hose adaptors

​​

FC1500 Billet Oval Fuel Pump Hanger Special Features

Single Fuel Pump Port

  • 8AN fuel ports

Dual Venturi Pump
  • The FC1500-2XV (2x Venturi) is the worlds first fuel system to feature Dual Venturi Vacuum Pumps.
  • Developed in-house using leading CFD modelling software and techniques (200 data points, 250 man hours and 90 hours of continuous simulation)
  • The Dual Venturi Vacuum Pumps require no wiring, draw no current yet is able to generate enough vacuum to pull through, using two billet 3/8 quick connect weld-on fittings, up to 220 litres per hour of fuel into the billet tubes and deliver fuel into the fuel pump pick-up zone to ensure that the fuel pumps are submerged at all times and there is no possibility of fuel starvation or fuel surge.
  • The weld-on fittings must be located at the furthest point at the rear of the fuel tank
  • The e85 corrugated hoses provided are 250mm in total length (please measure accurately before final fitment/welding) - if you require longer hose please add additional hose length to your order - see AVAILABLE OPTIONS above - "Extra Hose" 

Dual Vent/Breather
  • Dual 8AN vent/breather port for maximum venting under heavy load
  • Note: it is advised that tank is vented to charcoal canister and NOT atmosphere
Plug & Play
  • The FC1500-2XV features the Aftermarket Industries 6 way 30A (per pin) Plug & Play electrical connector to allow independent control of up to three fuel pumps.

Wiring Recommendation: Required For WARRANTY

Fuel Pump Qty Main Power Wire

Fuel Pump Power Wire

Relay Wire Size

Relay Size Fuel Pump Circuit Breaker
Single Pump 10-12 AWG Milspec 22759/16 10-12 AWG Milspec 22759/16 16 AWG Milspec 22759/16 35A-50A

25A Circuit Breaker or Fuse

Twin Pump 4-6 AWG Milspec 22759/16 (60A Type 1 Circuit Breaker) 10-12 AWG Milspec 22759/16 16 AWG Milspec 22759/16 35A-50A 25A Circuit Breaker or Fuse
Triple Pump 2-4 AWG  Milspec 22759/16 (80A Type 1 Circuit Breaker) 10-12 AWG Milspec 22759/16 16 AWG Milspec 22759/16 35A-50A 25A Circuit Breaker or Fuse
  • Electrical Wire & Circuit Size Formula
    • Circuit Breaker/Fuse Size: 125% (1.25x) total Peak Current (Amps)
      • ​Circuit Breaker/Fuse must NOT exceed wire current rating
    • Wire Size: 150% (1.5x) total Peak Current (Amps)
    • Relay Size: 225% (2.25x) total Peak Current (Amps)

Bio-Fuel Compatible

  • Zero fuel vapour loss

  • Zero fuel smell GUARANTEED due to anodising process

  • Unleaded, Ethanol, C16

Engineering

  • Precision machined from aerospace grade 6061-T6 billet aluminium, designed using best practice engineering principles and stress tested to ensure maximum safety for all motorsport applications

Compatible Fuel Pumps

  • Walbro 255

  • Walbro 460

  • Walbro 520 / 525

  • Bosch BR540

  • please select either the Walbro or Bosch fuel bracket from the AVAILABLE OPTIONS above - "Fuel Pump Bracket"
  • PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump" or "Bosch Fuel Pump".
Compatible Fuel Tanks
  • Custom - may require the FC1500 billet aluminium weld-on flange
  • ATL 6x9 FIA-FT3 fuel tanks (please check minimum internal height before purchase)
  • Fuel Safe 6x9 FIA-FT3 fuel tanks (please check minimum internal height before purchase)
  • Most FIA-FT3 6x9 fuel tanks
Height Adjustable
  • Fuel pump height is adjustable between 230mm to 300mm internal depth/height

  • Baffle height is also adjustable

Power Support Table

Fuel Type

Fuel Pump

Power HP*

Pressure PSI**

Voltage***

Ethanol

1x Walbro 460

500

70

13.5v

Ethanol

1x Bosch B540

650*

70

13.5v

Ethanol

2x Walbro 460

850*

75

13.5v

Ethanol

2x Bosch BR540

1200*

80

13.5v

Ethanol
 3x Bosch BR540
1500* 85 13.5v

*BASE FUEL PRESSURE MUST BE SET @ 40 PSI OR LOWER

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Maximum Total Peak Fuel Pressure (Base Pressure + Boost Pressure)

***Maximum Voltage

Rotary Engine: Reduce Horsepower HP Support Figures by 30% (Must also increase injector size by 30%)

Need a Billet Oval Weld-On Flange? Machined from 6061-T6, the FC1500 billet weld-on flange is perfect for those that wish to fabricate their own fuel tank. see AVAILABLE OPTIONS above "FC1500 Weld-on Flange".

Need a Fuel Level Sender? Select from the AVAILABLE OPTIONS above "Fuel Level Sender".

FuelSale Fuel Sender

*PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump" or "Bosch Fuel Pump"

Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above "Fuel Pressure Regulator".

Need Power? Aftermarket Industries now offers a motorsport-grade Power Distribution Kit for up to 3 pumps (photo below is for promotional purposes only - kit requires assembly, cut & crimp) see our range of Electrical Wiring Kits

Do I Need To Stage My Fuel Pumps? YES! Fuel pump operation MUST be staged via a Hobbs Pressure Switch, Aftermarket ECU or PDM. See AVAILABLE OPTIONS above - "Hobbs Switch"

Need a Stainless Steel Fuel Filter? Aftermarket Industries developed the first and only 200  micron fuel filter / strainer designed for motorsport conditions and bio-fuels such as ethanol (e85): see AVAILABLE OPTIONS above - "Stainless Steel Walbro/Bosch Fuel Filter" (select the desired quantity)

Includes the following items: requires Assembly (estimated assembly time 30 minutes; assembly guide provided)

  • Billet FC1500 hanger (8AN ports)

  • 6 way 90 degree male electrical connector kit (2x female connectors, 12x pins, circlip and o-ring)

  • Billet Triple fuel pump bracket (includes stainless steel fasteners and viton rubber insert) - please select either the Walbro or Bosch fuel pump bracket kit

  • Two (2) billet swivel fittings

  • Dual billet venturi vacuum pump kit (includes two (2) 3/8 billet quick connect fittings, four (4) 90 degree plastic quick connect hose adapters & two (2) 250mm e85 flexible corrugated hose kits with four (4) stainless steel hose clamps pre-assembled)

  • Baffle plate kit (includes two billet baffle plate adapters, laser cut baffle plate and stainless steel fasteners)

FREE FUEL SYSTEM ADVICE

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

Fuel System Advice (FREE)

*These products are designed for race use only and must be correctly fitted by licenced automotive professionals or workshops. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*Fuel tanks MUST not vent to the atmosphere AND is a fire hazard; a charcoal cannister.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have

Product Specifications

Weight 6 kg
Dimensions 25 × 25 × 25 cm
0
    0
    Your Cart
    Your cart is emptyReturn to Shop