​

*PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump".

Need to Stage Three Pumps Independently? We've now developed an e85 compatible & submersible 90 degree (30A per pin) triple fuel pump 6 way electrical connector kit which features a billet aluminium weld-on flange (includes 6x 10 AWG (30A) Metri-Pack 280 series pins per connector and is designed SPECIFICALLY for 10 AWG (30A) Tefzel Mil-Spec 22759/34 wire.

Do I Need TO Stage My Fuel Pumps? YES! Fuel pumps MUST be staged in a multi-pump application - See AVAILABLE OPTIONS above - "Hobbs Switch"

Specifications:

• 4 PSI Hobbs  Switch
• 24" inch harness with 2x female Delphi 280 Series Connectors & 1x male Delphi 280 Series Connector (includes pins)

Need Power?- See AVAILABLE OPTIONS above - "Power Distribution Kit"

• Aftermarket Industries now offers a motorsport-grade Power Distribution Kit for up to 3 pumps (photo below is for promotional purposes only - kit requires assembly, cut & crimp)
• Package Includes
  • Bussman three way Power Distribution Unit (cavity plugs/cable seals/pins)
  • Low profile laser cut & CNC folded mounting bracket (supplied in black finish)
  • 3x 50A mini relays
  • 3x 30A circuit breakers
  • 8m 10 AWG (30A) Tefzel Mil-Spec 22759/34 fuel pump power & ground wire
  • 8m 16 AWG (15A) Tefzel Mil-Sec 22759/16 relay signal & ground wire
  • 1x Delphi 280 (30A) series 3 way fuel pump power connector & 10 AWG (30A) pins
  • 1x Delphi 280 (30A) series 3 way relay signal power connector & 16 AWG (15A) pins
  • 1x crimping tool
  • 1x 21 inch 2 AWG (90A) Tefzel Mil-Spec 22759/16 PDU power cable & 80A type 2 circuit breaker
  • 1x 6 inch 2 AWG (90A) tefzel Mil-Spec 22759/16 PDU ground cable

Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above - "Fuel Pressure Regulator".

Need a Stainless Steel Fuel Filter (Walbro Pumps Only)? Aftermarket Industries developed the first and only 200  micron fuel filter / strainer designed for motorsport conditions and bio-fuels such as ethanol (e85): see AVAILABLE OPTIONS above - "Stainless Steel Walbro Fuel Filter" (select the desired quantity)

Includes the following items: requires Assembly (estimated assembly time 30 minutes; assembly guide provided)

• Billet FS1500 hanger (8AN ports)

• Billet weld-on flange (includes stainless steel fasteners and o-rings)

• 6 way 90 degree male electrical connector kit (2x female connectors, 12x pins, weld-on flange, circlip and o-ring)

• Billet Triple fuel pump bracket (includes stainless steel fasteners and viton rubber insert) - please select either the Walbro or Bosch fuel pump bracket kit

• Two (2) billet swivel fittings

• Baffle plate kit (includes two billet baffle plate adapters, laser cut baffle plate and stainless steel fasteners)​

​FREE FUEL SYSTEM ADVICE

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

​

*These products are designed for race use only and must be correctly fitted by licenced automotive professionals or workshops. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*Fuel tanks MUST not vent to the atmosphere AND is a fire hazard; a charcoal cannister.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.