Loading...

NEED HELP WITH YOUR PROJECT?

02 8001 6650

1400 Horsepower Fuel System Package (Holden VE)

Product Code: FS1000-VE-1200HP

$ 3,798.00

Product total
Options total
Grand total

Holden VE 1400 Horsepower Fuel System Upgrade

Package Includes the following:

  • Aftermarket Industries FS1000 V3 Update Surge Tank
    • direct replacement of OEM module - simply integrate the OEM fuel level sender unit
  • Turbosmart FPR8 Fuel Pressure Regulator (mounted at the rear; non-return setup - includes 4m silicon vacuum hose - positive vacuum reference ONLY)
  • 2x Walbro 535 Fuel Pumps
    • includes 2x Aftermarket Industries stainless steel fuel filters
  • Aftermarket Industries Plug & Play quick connect e85 compatible black nylon braided fuel hose kit
  • Aftermarket Industries Mil-Spec Plug & Play wiring harness
  • Aftermarket Industries Billet Quick Connect Fitting & EFI OEM-Grade Plastic Quick Connect Adapters (rated to 10 bar / 143 PSI)

​Package Details & Common Asked Questions

1. Do I Need to Upgrade The OEM Fuel Lines, Fuel Pressure Regulator or Fuel Rail ?

a) Fuel Lines: 

  • Non-Return System (Recommended for Supercharged Applications) 
    • Factory Supply Fuel Line: No - Does not require replacement; the package includes Quick Connector Adapters which integrated directly with the components supplied with the package, this includes the OEM hard fuel line at the rear of the vehicle.
    • Installation Notes:
      • Simply cut the rubber hose provided into correct lengths & install the Plastic Quick Connect Adapters (it is your responsibility to ensure hoses, adapters and fittings are correctly installed)

b) Fuel Rail:

  • Non-Return System: No - Testing has revealed that the factory fuel lines and fuel rail is more than sufficient to support the fuel volume without excessive pressurisation.

c) Fuel Pressure Regulator: Yes -The OEM fuel regulator is located with the OEM fuel pump module; this is replaced by the Turbosmart FPR8 fuel pressure regulator (provided with this package)

FS1000-V3 Fuel Surge Tank Power Support Guidelines
Fuel Pump Power HP (Ethanol) Power HP (Unleaded) Base Fuel Pressure* (PSI) Max Boost (PSI) Peak Fuel Pressure**

(PSI)

Voltage***

(v)

2x Walbro 535 1400 1500 40* (275 kPa) 25 65 (380 kPa) 14.5v
*BASE FUEL PRESSURE MUST BE SET @ FIGURES STATED OR LOWER TO ACHIEVE HORSEPOWER TARGET

(Ensure correct kPa range parameters are set within the ECU)

(Recommended Fuel Injector: Bosch Motorsport 2200cc)

**Maximum Combined Fuel Pressure (Base Fuel Pressure + Boost Pressure)

***Maximum Voltage (DO NOT USE VOLTAGE BOOSTERS)

ADDITIONAL INSTALLATION ADVICE:

  • VE Specification: Please select the CORRECT VE Model Specification above - see "VE Specification"
    • ​2006-2009 Notes:
      • Fuel Level Sender: The OEM fuel level sender is NOT compatible - One of the following OEM fuel level senders MUST be purchased (NOT PROVIDED WITH THIS KIT): VE 2010+, Camaro ZL1 or VF fuel NOT included with the FS1000-V3 surge tank
      • Venturi Cross-Over Hose: The OEM venturi cross-over hose is NOT compatible - Aftermarket Industries will provide a direct replace FREE of charge
  • Aftermarket tune is necessary to ensure correct AFR's and optimal performance
  • Fuel pump operation: The Walbro 535 (F90000295) fuel pump do not feature one-way check valves and cannot be staged and must be operated full-time
  • Start-up/Prime Procedure - Due to the fact the fuel do not have check valves, the initial start-up/prime procedure must be edited to ensure the minimum fuel pressure thresholds are reached prior to ignition.
  • OEM FSCM may trigger errors or read lean at WOT due to higher values than OEM settings - please consult with an experienced tuner or ECU hardware & software manufacture; HP Tuners MPVI2 PLUS recommended (visit for pricing: https://www.hptuners.com/mpvi2plus/)
    • FACTORY FUEL PRESSURE SETTINGS MUST BE ADJUSTED/REVISED

​UPGRADE TO THE BOSCH MOTORSPORT 2200CC INJECTORS FOR ONLY $1160 (FLEX-85 COMPATIBLE)

  • Includes 8x Bosch 2200cc Injectors (Aftermarket Industries in an AUTHORISED DEALER BOSCH MOTORSPORT DEALER)

FREE FUEL SYSTEM CONSULTATION

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Product Specifications

Weight 7 kg
Dimensions 28 × 28 × 28 cm

Reviews

There are no reviews yet.

Be the first to review “1400 Horsepower Fuel System Package (Holden VE)”

Your email address will not be published. Required fields are marked *

0
    0
    Your Cart
    Your cart is emptyReturn to Shop