Loading...

NEED HELP WITH YOUR PROJECT?

Holden VE 700 Horsepower Fuel System Package (Track Edition)

Product Code: FS1000-VE-700

AUD$ 2,998.00(Approx. $USD 2,128.58)

Product total
Options total
Grand total

Package Includes the following

  • Aftermarket Industries FS1000 V3 (Track Edition)(direct replacement of OEM module)
  • 1x Walbro 535 fuel pump (F90000295)
  • Turbosmart FPR6 Fuel Pressure Regulator
  • Aftermarket Industries Plug & Play e85 Quick Connect fuel hose kit
  • Aftermarket Industries Plug & Play mil-spec wiring harness
  • Aftermarket Industries Billet Quick Connect Fitting & EFI OEM-Grade Plastic Quick Connect Adapters (rated to 10 bar / 143 PSI)

​PACKAGE DETAILS & COMMONLY ASKED QUESTIONS

1. Do I Need to Upgrade The OEM Fuel Lines, Fuel Pressure Regulator or Fuel Rail ?

a) Fuel Lines: 

  • Non-Return System (Recommended for Supercharged Applications) 
    • Factory Supply Fuel Line: No - Does not require replacement; the package includes the Aftermarket Industries Plug & Play Quick Connector e85 fuel hose kit which integrated directly the OEM hard supply fuel line at the rear of the vehicle.

b) Fuel Rail:

  • Non-Return System: No - Testing has revealed that the factory fuel lines and fuel rail is more than sufficient to support the fuel volume without excessive pressurisation.

c) Fuel Pressure Regulator: Yes -The OEM fuel regulator is located with the OEM fuel pump module; this is replaced by the Turbosmart FPR6 fuel pressure regulator (provided with this package)

FS1000-V3 Fuel Surge Tank Power Support Guidelines
Fuel Pump Power HP (Ethanol) Power HP (Unleaded) Base Fuel Pressure* (PSI) Boost Pressure**

(PSI)

Voltage***

(v)

1x Walbro 535 600 700 40* 15 14.5v
*BASE FUEL PRESSURE MUST BE SET @ FIGURES STATED

(Ensure correct kPa range parameters are set within the ECU)

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Maximum Supercharger / Turbocharger Boost Pressure

***Maximum Voltage

ADDITIONAL INSTALLATION ADVICE:

  • VE Specification: Please select the CORRECT VE Model Specification above - see "VE Specification"
    • ​2006-2009 Notes:
      • Fuel Level Sender: The OEM fuel level sender is NOT compatible - One of the following OEM fuel level senders MUST be purchased (NOT PROVIDED WITH THIS KIT): VE 2010+, Camaro ZL1 or VF fuel NOT included with the FS1000-V2 surge tank
      • Venturi Cross-Over Hose: The OEM venturi cross-over hose is NOT compatible - Aftermarket Industries will provide a direct replace FREE of charge
  • Aftermarket tune is necessary to ensure correct AFR's and optimal performance
  • OEM FSCM may trigger errors or read lean at WOT due to higher values than OEM settings - please consult with an experienced tuner or ECU manufacturer
  • REQUIRES BY-PASS OF ECU FACTORY FUEL PUMP SETTINGS​

WIRING (POWER DISTRIBUTION - PLUG & PLAY):

Aftermarket Industries now offers a motorsport-grade Power Distribution Kit  (kit requires assembly, cut & crimp & installation by a registered automotive electrician)

  • Package Includes
    • Power Distribution Box
    • 1x 35A Relay
    • 1x 25A Fuse
    • Milspec Wire (ALL wire 12AWG 22759/16 milspec)
    • 1x set of high-current wire lugs​

​UPGRADE TO THE BOSCH MOTORSPORT 1650CC INJECTORS FOR ONLY $1685 (FLEX-85 COMPATIBLE)

  • Includes 8x (unmodified) GENUINE Bosch Motorsport 1650cc Injectors (Aftermarket Industries in an AUTHORISED DEALER BOSCH MOTORSPORT DEALER)

FREE FUEL SYSTEM CONSULTATION

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Product Specifications

Weight 7 kg
Dimensions 28 × 28 × 28 cm

Reviews

There are no reviews yet.

Be the first to review “Holden VE 700 Horsepower Fuel System Package (Track Edition)”

Your email address will not be published. Required fields are marked *

0
    0
    Your Cart
    Your cart is emptyReturn to Shop