700 Horsepower Fuel System Package (Track Edition)
Product Code: FS1000-VF-700
$USD 2,128.58
Aftermarket Industries Holden VF 700HP Fuel System Package (Track Edition)
Package Includes the following
- Aftermarket Industries FS1000 V3 Surge Tank
- (direct replacement of OEM module - simply attach the OEM fuel level sender)
- 1x Walbro 535 fuel pump refer to Horsepower Support Table below)
- (includes Aftermarket Industries stainless steel fuel filter)
- Turbosmart FPR6 Fuel Pressure Regulator (mounted at the rear; non-return setup, positive vacuum only)
- Aftermarket Industries Plug & Play quick connect fuel hose kit
- Aftermarket Industries Milspec pigtail harness (integrates into OEM connector)
- Aftermarket Industries Billet Quick Connect Fitting & EFI OEM-Grade Plastic Quick Connect Adapters (rated to 10 bar / 143 PSI)
Package Details & Commonly Asked Questions
1. Do I Need to Upgrade The OEM Fuel Lines, Fuel Pressure Regulator or Fuel Rail ?
a) Fuel Lines:
- Non-Return System (Recommended for Supercharged Applications)
- Factory Supply Fuel Line: No - Does not require replacement; the package includes Quick Connector Adapters which integrated directly with the components supplied with the package, this includes the OEM hard fuel line at the rear of the vehicle.
b) Fuel Rail:
- Non-Return System: No - Testing has revealed that the factory fuel lines and fuel rail is more than sufficient to support the fuel volume without excessive pressurisation.
c) Fuel Pressure Regulator: Yes -The OEM fuel regulator is located with the OEM fuel pump module; this is replaced by the Turbosmart FPR6 fuel pressure regulator (provided with this package)
FS1000-V2 Fuel Surge Tank Power Support Guidelines | |||||||||
Fuel Pump | Power HP (Ethanol) | Power HP (Unleaded) | Base Fuel Pressure* (PSI) | Peak Fuel Pressure**
(PSI) |
Voltage***
(v) |
||||
1x Walbro 535 | 600 | 700 | 40*
(275 kPa) |
65
(449 kPa) |
14.5v | ||||
*BASE FUEL PRESSURE MUST BE SET @ FIGURES STATED (Recommended Fuel Injector: Bosch Motorsport 1650cc) **Maximum Combined Fuel Pressure (Base Fuel Pressure + Boost Pressure) ***Maximum Voltage |
ADDITIONAL INSTALLATION ADVICE:
- VF Specification: Please select the CORRECT VF Model Specification above - see "VF Specification"
- Fuel pump operation: The Walbro 535 (F90000295) fuel pump do not feature one-way check valves and cannot be staged and must be operated full-time
- Start-up/Prime Procedure - Due to the fact the fuel do not have check valves, the initial start-up/prime procedure must be edited to ensure the minimum fuel pressure thresholds are reached prior to ignition.
- Aftermarket tune is necessary to ensure correct AFR's and optimal performance
- OEM FSCM WILL trigger errors or read lean at WOT due to higher values than OEM settings - please consult with an experienced tuner or ECU manufacturer - HPtuners FSCM software edit options are HIGHLY recommended
- FACTORY FUEL FUEL PRESSURE (kPa) SETTINGS MUST BE ADJUSTED
Upgrade to the Bosch Motorsport 1650cc injectors for ONLY $1685 (flex-85 compatible)
- Includes 8x (unmodified) GENUINE Bosch Motorsport 1650cc Injectors (Aftermarket Industries in an AUTHORISED DEALER BOSCH MOTORSPORT DEALER)
FREE FUEL SYSTEM CONSULTATION
Is all this too overwhelming? Don't worry, you're not alone!
*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.
*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.
Product Specifications
Weight | 7 kg |
---|---|
Dimensions | 28 × 28 × 28 cm |