Holden VE 1000 Horsepower Fuel System Package (Track Edition)
Product Code: FS1000-VE-1000HP-TE
$USD 2,832.19
The ultimate Street, Track & Competition Proven Holden VE 1000 Horsepower Fuel System Upgrade Package
Package Includes the following: (Compatible with Sedan, Wagon and UTE)
- Aftermarket Industries FS1000 V3 Update Surge Tank (Track Edition) (direct replacement of OEM module)
- Turbosmart FR8 Fuel Pressure Regulator
- 2x Walbro 460 Fuel Pumps (refer to the Horsepower Support Table below)
- Aftermarket Industries e85 Plug & Play Quick Connect fuel hose kit
- Milspec Wiring Harness - Plug & Play
- Aftermarket Industries Billet Quick Connect Fitting & EFI OEM-Grade Plastic Quick Connect Adapters (rated to 10 bar / 143 PSI) - Plug & Play
- Project Management & Installation Support
| FS1000-V3 Fuel Surge Tank Power Support Guidelines | |||||||||
| Fuel Pump | Power HP (Ethanol) | Power HP (Unleaded) | Base Fuel Pressure* (PSI) | Max Boost (PSI) | Peak Fuel Pressure**
(PSI) |
Voltage***
(v) |
|||
| 2x Walbro 460 | 1000 | 1100 | 40*
(275 kPa |
25 | 65
(448 kPa) |
14.5v | |||
| *BASE FUEL PRESSURE MUST BE SET @ FIGURES STATED OR LOWER TO ACHIEVE HORSEPOWER TARGET
(Ensure correct kPa range parameters are set within the ECU) (Recommended Fuel Injector: Bosch Motorsport 1650cc) **Maximum Combined Fuel Pressure (Base Fuel Pressure + Boost Pressure) ***Maximum Voltage (DO NOT USE VOLTAGE BOOSTERS) |
|||||||||
ADDITIONAL INSTALLATION ADVICE:
- VE Specification: Please select the CORRECT VE Model Specification above - see "VE Specification"
- 2006-2009 Notes:
- Fuel Level Sender: The OEM fuel level sender is NOT compatible - One of the following OEM fuel level senders MUST be purchased (NOT PROVIDED WITH THIS KIT): VE 2010+, Camaro ZL1 or VF fuel NOT included with the FS1000-V3 surge tank
- Venturi Cross-Over Hose: The OEM venturi cross-over hose is NOT compatible - Aftermarket Industries will provide a direct replace FREE of charge
- 2006-2009 Notes:
- Aftermarket tune is necessary to ensure correct AFR's and optimal performance
- OEM FSCM may trigger errors or read lean at WOT due to higher values than OEM settings - please consult with an experienced tuner or ECU hardware & software manufacture; HP Tuners MPVI2 PLUS recommended (visit for pricing: https://www.hptuners.com/mpvi2plus/)
- REQUIRES BY-PASS OF ECU FACTORY FUEL PUMP SETTINGS
WIRING (PLUG & PLAY):
Aftermarket Industries now offers a professional motorsport-grade (kit requires installation by a qualified automotive electrician - select Vehicle Body Type)
- Package Includes
- Mil-Spec Aviation-grade Wire (fuel pump power & fuel pump ground - white colour available in WHITE ONLY)
- Mil-Spec Aviation-grade Wire (relay signal & ground)
- 2x 35A Relays
- 2x 25A Fuses
- High-current wire lugs
- Motorsport-grade connectors
UPGRADE TO THE BOSCH MOTORSPORT 1650CC INJECTORS FOR ONLY $1685 (FLEX-85 COMPATIBLE)
- Includes 8x (unmodified) GENUINE Bosch Motorsport 1650cc Injectors (Aftermarket Industries in an AUTHORISED DEALER BOSCH MOTORSPORT DEALER)
FREE FUEL SYSTEM CONSULTATION
Is all this too overwhelming? Don't worry, you're not alone!
*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.
*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.
Product Specifications
| Weight | 7 kg |
|---|---|
| Dimensions | 28 × 28 × 28 cm |
