Fuel Pump Hanger (FS1500)

Product Code: FS1500

AUD$ 995.00

Product total
Options total
Grand total

FS1500 Fuel Pump Hanger Special Features

Plug & Play

    • The FS1500 features the Aftermarket Industries 6 way 30A (per pin) Plug & Play electrical connector to allow independent control of up to three fuel pumps.​

Wiring Recommendation: required for WARRANTY

Fuel Pump Qty Main Power Wire Fuel Pump Power Wire Relay Wire Size Relay Size Fuel Pump Circuit Breaker
Single Pump 10-12 AWG Milspec 22759/16 10-12 Tefzel Milspec 22759/16 16 AWG Milspec 22759/16 35A-50A 25A Circuit Breaker or Fuse
Twin Pump 6 AWG Milspec 22759/16 (50A-60A Type Circuit Breaker/Fuse) 10-12 AWG Milspec 22759/16 16 AWG Milspec 22759/16 35A-50A 25A Circuit Breaker or Fuse
Triple Pump 2-4 AWG Milspec 22759/16 (80A Circuit Breaker/Fuse) 10-12 AWG Milspec 22759/16 16 AWG Milspec 22759/16 35A-50A 25A Circuit Breaker or Fuse

Electrical Wire & Circuit Size Formula

Circuit Breaker/Fuse Size: 125% (1.25x) total Peak Current (Amps)

​Circuit Breaker/Fuse must NOT exceed wire current rating

Wire Size: 150% (1.5x) total Peak Current (Amps)

Relay Size: 225% (2.25x) total Peak Current (Amps)

Single Fuel Pump Port

    • 8AN fuel ports

Bio-Fuel Compatible

    • Zero fuel vapour loss
    • Zero fuel smell GUARANTEED due to anodising process
    • Unleaded, Ethanol, C16
    • Precision machined from aerospace grade 6061-T6 billet aluminium, designed using best practice engineering principles and stress tested to ensure maximum safety for all motorsport applications

Compatible Fuel Pumps

    • Walbro 460
    • Walbro 520/525
    • Walbro 530 fuel pumps
    • Bosch BR540
    • Fuel Pumps Not Included - see AVAILABLE OPTIONS above - "Fuel Pump"
Height Adjustable
    • Suitable for tanks 250mm (pictured) internal depth/height to 300mm internal depth/height.
    • Require a shorter 210mm internal depth/height configuration? see "AVAILABLE OPTIONS" above - "Select Height"
    • Require More Height? Add additional sets (package contains 1 set as standard) of our billet perforated spacers which will increase the overall height by 50mm per set (available in BLACK anodise ONLY): see "AVAILABLE OPTIONS" above - "Billet Spacer Set".​


FS1500 Fuel Pump Hanger Power Support Table
Fuel Type Fuel Pump Power HP* Peak Pressure PSI** Voltage***
Ethanol 1x Walbro 460 500 70 13.5v-14v
Ethanol 1x Walbro 530/525 or 1x Bosch BR540 650* 70 13.5v-14v
Ethanol 2x Walbro 460 850* 75 13.5v-14v
Ethanol 2x Walbro 520/525 or 2x Bosch BR540 1200* 75 13.5v-14
Ethanol 3x Walbro 460 1400* 80 13.5v-14v
Ethanol 3x Walbro 520/525 or 3x Bosch BR540 1500* 80 13.5v-14v

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Peak Fuel Pressure (Base Pressure + Boost Pressure)

***Peak Voltage

Rotary Engine: Reduce Horsepower HP Support Figures by 30% (Must increase fuel injector size by 30%)


*PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump" or "Bosch Fuel Pump".

Need a Pre-Wired Motorsport Grade Wiring Kit?- See WIRING KITS

Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above - "Fuel Pressure Regulator".

Includes the following items: requires Assembly (estimated assembly time 30 minutes; assembly guide provided)

  • Billet FS1500 hanger (8AN ports)
  • Billet weld-on flange (includes stainless steel fasteners and o-rings)
  • 6 way 90 degree male electrical connector kit (2x female connectors, 12x pins, weld-on flange, circlip and o-ring)
  • Billet Triple fuel pump bracket (includes stainless steel fasteners and viton rubber insert) - please select either the Walbro or Bosch fuel pump bracket kit
  • Two (2) billet swivel fittings
  • Baffle plate kit (includes two billet baffle plate adapters, laser cut baffle plate and stainless steel fasteners)


Is all this too overwhelming? Don't worry, you're not alone!


*These products are designed for race use only and must be correctly fitted by licensed automotive professionals or workshops. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*Fuel tanks MUST not vent to the atmosphere AND is a fire hazard; a charcoal cannister.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Product Specifications

Weight 1 kg
Dimensions 20 × 20 × 10 cm


There are no reviews yet.

Be the first to review “Fuel Pump Hanger (FS1500)”

Your email address will not be published. Required fields are marked *

    Your Cart
    Your cart is emptyReturn to Shop