Need a Fuel Level Sender? Select from the AVAILABLE OPTIONS above "Fuel Level Sender".

*PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump" or "Bosch Fuel Pump"

Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above "Fuel Pressure Regulator".

Need a Stainless Steel Fuel Filter? Aftermarket Industries developed the first and only 200  micron fuel filter / strainer designed for motorsport conditions and bio-fuels such as ethanol (e85): see AVAILABLE OPTIONS above - "Stainless Steel Walbro/Bosch Fuel Filter" (select the desired quantity)

Need the Correct Electrical Connector? High current draw fuel pumps require a high performance external e85 electrical connector. We've developed our own as the OEM Delphi Apex 2.8mm 6 way connector are NOT e85 compatible - two (2) connectors are required and ARE included FREE (includes 6x 10 AWG (30A) Metri-Pack 280 series pins per connector and is designed SPECIFICALLY for 10-12 AWG (30A) Milspec 22759/16 wire.

Need Power? Aftermarket Industries now offers a motorsport-grade Power Distribution Kit for up to 3 pumps (photo below is for promotional purposes only - kit requires assembly, cut & crimp) see AVAILABLE OPTIONS above - "Power Distribution Kit" (Select 2 Way/Dual Fuel Pump or 3 Way/Triple Fuel Pump)

Do I Need To Stage My Fuel Pumps? YES! Fuel pump operation MUST be staged via a Hobbs Pressure Switch, Aftermarket ECU or PDM. See AVAILABLE OPTIONS above - "Hobbs Switch"

Specifications:

• 4 PSI Hobbs  Switch
• 24" inch harness with 2x female Delphi 280 Series Connectors & 1x male Delphi 280 Series Connector (includes pins)

Includes the following items: requires Assembly (estimated assembly time 30 minutes; assembly guide provided)

• Billet FC1500 hanger (8AN ports)

• 6 way 90 degree male electrical connector kit (2x female connectors, 12x pins, circlip and o-ring)

• Billet Triple fuel pump bracket (includes stainless steel fasteners and viton rubber insert) - please select either the Walbro or Bosch fuel pump bracket kit

• Two (2) billet swivel fittings

• Baffle plate kit (includes two billet baffle plate adapters, laser cut baffle plate and stainless steel fasteners)

​FREE FUEL SYSTEM ADVICE

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

​

*These products are designed for race use only and must be correctly fitted by licenced automotive professionals or workshops. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*Fuel tanks MUST not vent to the atmosphere AND is a fire hazard; a charcoal cannister.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.