FS1000-FGT Ford FGX XR6 Surge Tank Specifications

• Bulkhead Design
  • 90 degree low-profile Supply & Return 6AN fuel ports 
• ​Active Valve System 
  • ​​The AVS are engineered to close and trap fuel under acceleration, cornering and breaking
  • 83% faster re-fill rate than the OEM fuel system.​
• Venturi Vacuum Pump (OEM fuel system DOES NOT feature a V​enturi Vacuum Pump)
  • Developed in-house using leading CFD modelling software and techniques (200 data points, 250 man hours and 90 hours of continuous simulation)
  • Requires no wiring, draws no current yet is able to generate enough vacuum to pull through, using a fitting located on the lowest point of the surge tank, up to 200 litres per hour of fuel into the surge which will ensure that the fuel pumps are submerged at all times and there is no possibility of fuel starvation or fuel surge
• ​Composite Surge Tank
  • ​Aerospace grade 6061-T6 billet aluminium components
  • Lightweight injection moulded fuel bucket; aerospace plastic used by only the most advanced super car manufacturers

​

​

FS1000 Venturi Vacuum Pump Video

​

• Is the FS1000-FGT Plug & Play?
  • OEM Fuel Lines?
    • YES
  • OEM Fuel Rail?
    • YES
  • Fuel Level Sensor?
    • YES (requires simple connector update & extension; provided with kit)
  • OEM Fuel Pressure Regulator? 
    • The OEM fuel pressure regulator is far too restrictive; Aftermarket Industries has developed a fuel rail adapter which integrates into the OEM rail & fuel return line: the fuel rail adapter is included FREE with the FS1000-FGT - add the correct fuel pressure regulator to your package based on the Guidelines​​

 500

 600

 50*

 65

 14.5v

 850

 1000

 45*

 65

 14.5v

 1000

 1100

 40*

 75

 14.5v

 1100

 1200

 40*

 75

 14.5v

Package includes the following items: Requires Assembly (estimated assembly time 30 minutes; assembly guide provided)

• FS1000-FGT bulkhead (machined from aircraft grade 6061-T6 billet aluminium)
• Billet (6061-T6) twin (2) fuel pump bracket (includes stainless steel fasteners and Viton rubber insert/s)
• Two (2) billet (6061-T6) 3/8 push-lock fuel pump adaptor fittings 
• Billet (6061-T6) fuel pump manifold
• Billet (6061-T6) Venturi inlet adaptor
• Billet (6061-T6) Venturi (pump) tube
• Billet (6061-T6) Fuel rail adapter kit (regulator not included)
• ​Two (2) litre two piece surge tank (upper surge tank machined from 6061-T6, lower surge tank injection moulded from aerospace grade black Polyoxymethylene "POM" plastic)
• Bucket (POM) bottom plate with four (4) injection moulded (POM) floater valves
• Viton rubber o-rings included
• Replacement fuel pump module fuel tank retainer ring (laser cut 5005 aluminium)
• E85 compatible fuel pump/bulkhead hose

​Note: Fuel Rail Adaptor Kit, Fuel Pressure Regulator and Fuel Pumps ARE NOT INCLUDED in this package and can be added to your order ; see 'AVAILABLE OPTIONS'.

*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.