Ford FG-FGX (XR6) 1000 Horsepower Fuel System (Sedan)
Product Code: FS1000V3-FGT-FGX-1000
$USD 2,445.95
FS1000V3 Ford FG-FGX (XR6) Sedan 1000 Horsepower Fuel System / Surge Tank Specifications (Q&A)
- Fits the OEM Fuel Tank?
- YES - this is a direct replacement of the OEM fuel pump module
- Works with the OEM Fuel Lines?
- YES
- Works with the OEM Fuel Rail?
- YES - the package includes the Aftermarket Industries fuel rail adapter & fuel pressure regulator kit
- Works with OEM Fuel Level Sensor?
- YES (requires simple connector update & extension; provided with kit)
- Wiring Harness?
- YES (Aftermarket Industries now offers a motorsport grade dual relay Plug & Play harness which ONLY uses aerospace grade 22759/16 mil-spec wire)
- Does the kit include a Fuel Pressure Regulator?
- Yes; Aftermarket Industries has developed a fuel rail adapter which integrates into the OEM rail & fuel return line.
- Surge Protection?
- Yes, the FS1000V3 surge tank features a venturi pump (the OEM fuel pump module does NOT have venturi pump) and provides surge protection down to 5% fuel tank capacity under all motorsport conditions
- 1000hp At the Wheels?
- YES, this package will support 1000hp atw on e85 up to 45psi of boost (base fuel pressure must be set to 40psi - injectors MUST be 2000cc - injectors NOT included)
- Need more power? Check out our 1200hp Kit
- YES, this package will support 1000hp atw on e85 up to 45psi of boost (base fuel pressure must be set to 40psi - injectors MUST be 2000cc - injectors NOT included)
FS1000V3-FGT Surge Tank Installation Notes
- OEM Wideband Sensor is recommended
- Aftermarket tune is necessary to ensure correct AFR's and optimal performance
- OEM ECU may trigger errors or read lean at WOT due to higher values than OEM settings - please consult with an experienced tuner or aftermarket ECU manufacturer
FREE FUEL SYSTEM CONSULTATION
Is all this too overwhelming? Don't worry, you're not alone!
1000 Horsepower Package includes the following items
- FS1000V3-FGT surge tank
- 2x Walbro 460 fuel pumps with stainless steel fuel filters
- Stainless steel locking ring
- Hose adapter kit
- Fuel rail adapter kit
- Turbosmart FPR6 fuel pressure regulator
- Milspec wire harness
- Honeywell 4psi Hobbs Switch kit
- Fuel pressure gauge (120psi)
*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.
*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.
Product Specifications
| Weight | 8 kg |
|---|---|
| Dimensions | 35 × 28 × 28 cm |
Reviews
There are no reviews yet.