1200 Horsepower Fuel System Package (Jeep Trackhawk)
Product Code: FS1000-TRKH-1200HP
$USD 3,755.19
Jeep Grand Cherokee Trackhawk 1200 Horsepower Fuel System Upgrade
Package Includes the following:
- Aftermarket Industries FS1000 V3 Update Surge Tank
- direct replacement of OEM module - simply integrate the fuel level sender unit
- Turbosmart FPR8 Fuel Pressure Regulator (includes 1m silicon vacuum hose - positive vacuum reference ONLY)
- 2x Walbro 525 (F90000285) Fuel Pumps
- includes 2x Aftermarket Industries stainless steel fuel filters
- Aftermarket Industries Plug & Play quick connect e85 compatible black nylon braided fuel hose kit & billet Quick Connect fittings - made to customer specifications
- Aftermarket Industries Mil-Spec Wire Harness - made to customer specifications
| FS1000-V3 Fuel Surge Tank Power Support Guidelines | |||||||||
| Fuel Pump | Power HP (Ethanol) | Power HP (Unleaded) | Base Fuel Pressure* (PSI) | Max Boost (PSI) | Peak Fuel Pressure**
(PSI) |
Voltage***
(v) |
|||
| 2x Walbro 525 | 1200 | 1300 | 40* (275 kPa) | 25 | 65 (448 kPa) | 14.5v | |||
| *BASE FUEL PRESSURE MUST BE SET @ FIGURES STATED OR LOWER TO ACHIEVE HORSEPOWER TARGET
(Ensure correct kPa range parameters are set within the ECU) (Recommended Fuel Injector: Bosch Motorsport 1650cc) **Maximum Combined Fuel Pressure (Base Fuel Pressure + Boost Pressure) ***Maximum Voltage (DO NOT USE VOLTAGE BOOSTERS) |
|||||||||
ADDITIONAL INSTALLATION ADVICE:
- Aftermarket tune is necessary to ensure correct AFR's and optimal performance
- OEM FSCM may trigger errors or read lean at WOT due to higher values than OEM settings - please consult with an experienced tuner or ECU hardware & software manufacture; HP Tuners MPVI2 PLUS recommended (visit for pricing: https://www.hptuners.com/mpvi2plus/)
- FACTORY FUEL PRESSURE SETTINGS MUST BE ADJUSTED/REVISED
FREE FUEL SYSTEM CONSULTATION
Is all this too overwhelming? Don't worry, you're not alone!
*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.
*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.
Product Specifications
| Weight | 4 kg |
|---|---|
| Dimensions | 28 × 28 × 28 cm |
