1000 Horsepower Fuel System Package (Jeep Trackhawk)
Product Code: FS1000-TRKH-1000HP
$USD 2,548.19
Jeep Grand Cherokee Trackhawk 1000 Horsepower Fuel System Upgrade
Package Includes the following:
- Aftermarket Industries FS1000 V3 Surge Tank
- direct replacement of OEM module - simply integrate OEM fuel level sender unit
- Turbosmart FPR6 Fuel Pressure Regulator (includes 2.5m silicon vacuum hose - positive vacuum reference ONLY)
- 2x Walbro 460 (F90000274) Fuel Pumps
- includes 2x Aftermarket Industries stainless steel fuel filters
- (OPTIONAL) Aftermarket Industries Plug & Play quick connect e85 compatible black nylon braided fuel hose kit & billet Quick Connect fittings
- Aftermarket Industries Mil-Spec 6 Way connector - (Instructions: unpin the OEM 6-way connector, integrate the OEM pins/wires into the Aftermarket Industries 6-way connector & plug directly into the FS1000V3)
Package Details & Common Asked Questions
1. Do I Need to Upgrade The OEM Fuel Lines, Fuel Pressure Regulator or Fuel Rail?
a) Fuel Lines:
- Non-Return System (Recommended for Supercharged Applications)
- Factory Supply Fuel Line: The OEM supply fuel line DOES not require replacement however the FS1000V3 Surge Tank must be integrated into the supply line: Aftermarket Industries has developed an optional fuel line package which includes Quick Connector adapters that integrate directly with the OEM hard fuel line at the rear of the vehicle and also includes a new return fuel line & fuel lines to and from the fuel pressure regulator (supplied with the kit: Turbosmart FR6 regulator is mounted in the engine bay - instructions provided) and OEM fuel rail.
b) Fuel Rail:
- Non-Return System: No - Testing has revealed that the factory fuel lines, and fuel rail is more than sufficient to support the fuel volume without excessive pressurization.
c) Fuel Pressure Regulator: Yes -The OEM fuel regulator is located with the OEM fuel pump module; this is replaced by the Turbosmart FPR6 fuel pressure regulator (provided with this package)
FS1000-V3 Fuel Surge Tank Power Support Guidelines | |||||||||
Fuel Pump | Power HP (Ethanol) | Power HP (Unleaded) | Base Fuel Pressure* (PSI) | Max Boost (PSI) | Peak Fuel Pressure**
(PSI) |
Voltage***
(v) |
|||
2x Walbro 460 | 1000 | 1100 | 40* (275 kPa) | 20 | 60 (414 kPa) | 14.5v | |||
*BASE FUEL PRESSURE MUST BE SET @ FIGURES STATED OR LOWER TO ACHIEVE HORSEPOWER TARGET
(Ensure correct kPa range parameters are set within the ECU) (Recommended Fuel Injector: Bosch Motorsport 1650cc) **Maximum Combined Fuel Pressure (Base Fuel Pressure + Boost Pressure) ***Maximum Voltage (DO NOT USE VOLTAGE BOOSTERS) |
ADDITIONAL INSTALLATION ADVICE:
- Aftermarket tune is necessary to ensure correct AFR's and optimal performance
- OEM FSCM may trigger errors or read lean at WOT due to higher values than OEM settings - please consult with an experienced tuner or ECU hardware & software manufacture; HP Tuners MPVI2 PLUS recommended (visit for pricing: https://www.hptuners.com/mpvi2plus/)
- FACTORY FUEL PRESSURE SETTINGS MUST BE ADJUSTED/REVISED
FREE FUEL SYSTEM CONSULTATION
Is all this too overwhelming? Don't worry, you're not alone!
*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.
*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.
Product Specifications
Weight | 4 kg |
---|---|
Dimensions | 28 × 28 × 28 cm |