Fuel Pump  

 Power HP  (Ethanol)

 Power HP  (Unleaded & C16)

 Base Fuel Pressure*  (PSI)

 Peak Fuel Pressure  (PSI)**

 Voltage**

 1x Walbro 460

 500

 600

 40*

 65

 13.5v

 1x Walbro 520

 600

 650

 40*

 65

 13.5v

 2x Walbro 460

 850

 1000

 40*

 75

 13.5v

 2x Walbro 520

 1100

 1200

 40*

 70

 13.5v

*PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump".

Need a Stainless Steel Fuel Filter? Aftermarket Industries developed the first and only 200  micron fuel filter / strainer designed for motorsport conditions and bio-fuels such as ethanol (e85): see AVAILABLE OPTIONS above - "Stainless Steel Walbro Fuel Filter" (select the desired quantity)

Add a Fuel Bulkhead Fitting: A major issue with any aftermarket fuel system is a pressurised overflow from the surge tank back to the OEM fuel tank. A common mistake is the use of adapters; the OEM return in ALL instances is far too small and MUST be modified to ensure the fuel flows freely from the surge tank back into the OEM fuel pump module. We've now developed a super flow profile -8AN fuel bulkhead fitting to address any potential issues. Simply cut a small 20mm hole in the OEM module and secure the bulkhead fitting.

Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above "Fuel Pressure Regulator"

Need the Correct Electrical Connector? High current draw fuel pumps such as the Walbro 460, and Walbro 520 require a high performance external e85 electrical connector. We've developed our own as the OEM Delphi Apex 2.8mm 6 way connector are NOT e85 compatible - two (2) connectors are required and ARE included FREE (includes 6x pins per connector and is designed SPECIFICALLY for 10 AWG (30A) Tefzel Mil-Spec 22759/34 wire

Power Distribution Kit - See AVAILABLE OPTIONS above - "Power Distribution Kit" (Select 2 Way/Dual Fuel Pump or 3 Way/Triple Fuel Pump)

• Aftermarket Industries now offers a motorsport-grade Power Distribution Kit for up to 3 pumps (photo below is for promotional purposes only - kit requires assembly, cut & crimp)
• Package Includes
  • Bussman three way Power Distribution Unit (cavity plugs/cable seals/pins)
  • Low profile laser cut & CNC folded mounting bracket (supplied in black finish)
  • 2-3x 50A mini relays
  • 3x 30A or 30A circuit breakers (based on your specific targets - Aftermarket Industries will reach out to you directly)
  • 8m 10 AWG (30A) Tefzel Mil-spec 22759/34 fuel pump power & ground wire
  • 8m 16 AWG (15A) Tefzel Mil-sec 22759/16 relay signal & ground wire
  • 1x Delphi 280 (30A) series 3 way fuel pump power connectors & 10 AWG (30A) pins
  • 1x Delphi 280 (30A) series 3 way relay signal power connector & 16 AWG (15A) pins
  • 1x crimping tool
  • 1x 21 inch 2-4 AWG (75-90A) Tefzel Mil-Spec 22759/34 PDU power cable & 80A type 2 circuit breaker
  • 1x 6 inch 2-4 AWG (75-90A) Tefzel Mil-Spec 22759/16 PDU ground cable

​​​

Do I Need to Stage My Fuel Pumps? YES! Fuel pump operation MUST be staged via a Hobbs Pressure Switch, Aftermarket ECU or PDM. See AVAILABLE OPTIONS above - "Hobbs Switch"

Specifications:

• 4 PSI Hobbs  Switch
• 24" inch harness with 2x female Delphi 280 Series Connectors & 1x male Delphi 280 Series Connector (includes pins)

Package includes the following items: Requires Assembly (estimated assembly time 30 minutes; assembly guide provided)

• SPR1200v2 Surge Tank
• Billet bulkhead (-8AN ports)
• Billet Triple fuel pump bracket (includes stainless steel fasterners and viton rubber insert)
• Billet push-lock adaptor fittings (three (3) provided)
• Billet fuel pump manifold
• Viton rubber o-rings included
• E85 compatible fuel pump/bulkhead hose

FREE FUEL SYSTEM CONSULTATION

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

​

*These products are designed for race use only and must be correctly fitted by licenced automotive professionals or workshops. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*These tanks MUST not be pressurised, If you plan to use a high volume in-tank fuel pump you MUST use a-8AN fitting as the Overflow fitting located at the top of the surge tank. This will allow the fuel to return back to your fuel tank or fuel cell at the same rate fuel is supplied into the surge tank. Some vehicles may require modification of the OEM fuel pump assembly: If you are unsure, please complete the contact form and we will respond to your questions.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.