1400 Horsepower Fuel System Package (Track Edition)
Product Code: FS1000-VF-1400HP-TE
$USD 3,477.58
The Ultimate Street, Track and Competition Proven Holden VF 1400 Horsepower Fuel System Upgrade (Track Edition)
Package Includes the following:
- Aftermarket Industries FS1000 V3 Update Surge Tank
- direct replacement of OEM module - simply integrate the OEM fuel level sender unit
- Turbosmart FPR10 Pro Fuel Pressure Regulator (positive vacuum reference ONLY)
- 2x Walbro 535 Fuel Pumps
- includes 2x Aftermarket Industries stainless steel fuel filters
- Aftermarket Industries Plug & Play quick connect e85 compatible black nylon braided fuel hose kit - made to customer specifications
- Aftermarket Industries Mil-Spec Plug & Play wiring harness
- Aftermarket Industries Billet Quick Connect Fitting & EFI OEM-Grade Plastic Quick Connect (fuel lines made custom per the project requirements) Adapters (rated to 10 bar / 143 PSI)
- Project Management & Installation Support
| FS1000-V3 Fuel Surge Tank Power Support Guidelines | |||||||||
| Fuel Pump | Power HP (Ethanol) | Power HP (Unleaded) | Base Fuel Pressure* (PSI) | Max Boost (PSI) | Peak Fuel Pressure**
(PSI) |
Voltage***
(v) |
|||
| 2x Walbro 535 | 1400 | 1500 | 40* (275 kPa) | 25 | 65 (380 kPa) | 14.5v | |||
| *BASE FUEL PRESSURE MUST BE SET @ FIGURES STATED OR LOWER TO ACHIEVE HORSEPOWER TARGET
(Ensure correct kPa range parameters are set within the ECU) (Recommended Fuel Injector: ID1750cc or ID2600) **Maximum Combined Fuel Pressure (Base Fuel Pressure + Boost Pressure) ***Maximum Voltage (DO NOT USE VOLTAGE BOOSTERS) |
|||||||||
ADDITIONAL INSTALLATION ADVICE:
- Aftermarket tune is necessary to ensure correct AFR's and optimal performance
- Fuel pump operation: The Walbro 535 (F90000295) fuel pump do not feature one-way check valves and cannot be staged and must be operated full-time
- Start-up/Prime Procedure - Due to the fact the fuel do not have check valves, the initial start-up/prime procedure must be edited to ensure the minimum fuel pressure thresholds are reached prior to ignition.
- OEM FSCM may trigger errors or read lean at WOT due to higher values than OEM settings - please consult with an experienced tuner or ECU hardware & software manufacture; HP Tuners MPVI2 PLUS recommended (visit for pricing: https://www.hptuners.com/mpvi2plus/)
- FACTORY FUEL PRESSURE SETTINGS MUST BE ADJUSTED/REVISED
UPGRADE TO THE BOSCH MOTORSPORT 2200CC INJECTORS FOR ONLY $1160 (FLEX-85 COMPATIBLE)
- Includes 8x Bosch 2200cc Injectors (Aftermarket Industries in an AUTHORISED DEALER BOSCH MOTORSPORT DEALER)
FREE FUEL SYSTEM CONSULTATION
Is all this too overwhelming? Don't worry, you're not alone!
*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.
*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.
Product Specifications
| Weight | 7 kg |
|---|---|
| Dimensions | 28 × 28 × 28 cm |
Related products
-
Aftermarket Industries Long Sleeve (White)
$USD 34.79 Read more -
Fuel Pump Hanger with Surge Tank (FS1000-SV-AVS)
$USD 1,597.50 Select options -
Holden VE 1000 Horsepower Fuel System Package (Street Edition)
$USD 1,986.58 Select options -
Holden VE 700 Horsepower Fuel System Package (Track Edition)
$USD 2,128.58 Select options
