Fuel Pump Hanger (FC1000 Track Edition) with Surge Tank

FC1000-TE (Track Edition) Billet Oval Fuel Pump Hanger Special Features

Single Fuel Pump Port

• • 6AN Fuel ports
  • 8AN Vent/Breather port

Venturi Pump

• • The FC1000-TE (1x Venturi) features high-vacuum Venturi Vacuum Pump.
  • Developed in-house using leading CFD modelling software and techniques (200 data points, 250 man hours and 90 hours of continuous simulation)
  • The Venturi Vacuum Pump requires no wiring, draws no current yet is able to generate enough vacuum up to 220 litres per hour of fuel and deliver fuel into the fuel pump pick-up zone, located within the surge tank, to ensure that the fuel
  •  pumps are submerged at all times and there is no possibility of fuel starvation or fuel surge.

Surge Tank / Active Valve System

• • Active Valve System: The FC1000-TE surge tank features the Aftermarket Industries Active Valve System; The AFVS are engineered to close and trap fuel under acceleration, cornering and breaking. The valves then open, when load is reduced, to allow fuel to rapidly re-fill the surge tank to eliminate fuel surge and/or fuel starvation.

Vent/Breather

• • 8AN vent/breather port for maximum venting under heavy load
  • Note: it is advised that tank is vented to charcoal canister and NOT atmosphere

Plug & Play

Electrical Wire & Circuit Size Formula

Circuit Breaker/Fuse Size: 125% (1.25x) total Peak Current (Amps)

​Circuit Breaker/Fuse must NOT exceed wire current rating

Wire Size: 150% (1.5x) total Peak Current (Amps)

Relay Size: 225% (2.25x) total Peak Current (Amps)

Bio-Fuel Compatible

• • Zero fuel vapour loss
  • Zero fuel smell GUARANTEED due to anodising process
  • Unleaded, Ethanol, C16

Engineering

• • Precision machined from aerospace grade 6061-T6 billet aluminium, designed using best practice engineering principles and stress tested to ensure maximum safety for all motorsport applications

Compatible Fuel Pumps

• • Walbro 255
  • Walbro 460
  • Walbro 520 / 525
  • Bosch BR540
  • PUMPS ARE NOT INCLUDED IN THIS PACKAGE

• • Machined from 6061-T6 billet aluminium (includes viton o-ring and stainless steel fasteners)

• • Fuel pump height is adjustable between 254mm (10 inches) to 270mm (10.6 inches) internal depth/height

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Total Peak Fuel Pressure (Base Pressure + Boost Pressure)

***Peak Voltage

Rotary Engine: Reduce Horsepower HP Support Figures by 30% (must increase fuel injector size by 30%)