Loading...

NEED HELP WITH YOUR PROJECT?

Fuel Pump Hanger (FC1000) Single & Twin Fuel Pump

Product Code: FC1000

$USD 1,238.95

Product total
Options total
Grand total

FC1000 Billet Oval Fuel Pump Hanger Special Features

Single Fuel Pump Port

    • 6AN fuel ports (Supply & Return)
Vent/Breather
    • 8AN vent/breather port for maximum venting under heavy load
    • Note: it is advised that tank is vented to charcoal canister and NOT atmosphere

Plug & Play

    • The FC1000 features the Aftermarket Industries 6 way 30A (per pin) Plug & Play electrical connector to allow independent control of up to two fuel pumps.​

Wiring Recommendation: Required For WARRANTY

Fuel Pump Qty Main Power Wire Fuel Pump Power Wire Relay Wire Size Relay Size Fuel Pump Circuit Breaker
Single Pump 10-12 AWG Tefzel Mil-Spec 22759/16 10-12 AWG Milpec 22759/16 16 AWG Milspec 22759/16 35A-50A 25A Circuit Breaker or Fuse
Twin Pump 6 AWG Milspec 22759/16 (50A-60A Circuit Breaker/Fuse) 10 AWG Milspec 22759/16 16 AWG Milspec 22759/16 35A-50A 25A Circuit Breaker or Fuse
Electrical Wire & Circuit Size Formula

Circuit Breaker/Fuse Size: 125% (1.25x) total Peak Current (Amps)

​Circuit Breaker/Fuse must NOT exceed wire current rating

Wire Size: 150% (1.5x) total Peak Current (Amps)

Relay Size: 225% (2.25x) total Peak Current (Amps)

Bio-Fuel Compatible

    • Zero fuel vapour loss
    • Zero fuel smell GUARANTEED due to anodising process
    • Unleaded, Ethanol, C16

Engineering

    • Precision machined from aerospace grade 6061-T6 billet aluminium, designed using best practice engineering principles and stress tested to ensure maximum safety for all motorsport applications

Compatible Fuel Pumps

    • Walbro 255
    • Walbro 460
    • Walbro 520 / 525
    • Bosch BR540
    • ​please select either the Walbro or Bosch fuel bracket from the AVAILABLE OPTIONS above - "Fuel Pump Bracket"
    • PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump" or "Bosch Fuel Pump".

Compatible Fuel Tanks

  • Custom - See following flange & hanger dimensions (billet weld-on flange included)

Height Adjustable

    • Suitable for tanks 250mm to 270mm internal depth/height
Power Support Table
Fuel Type Fuel Pump Power HP* Peak Pressure PSI** Voltage***
Ethanol 1x Walbro 460 500 70 13.5v-14v
Ethanol 1x Walbro 520/525 or 1x Bosch B540 650* 70 13.5v-14v
Ethanol 2x Walbro 460 850* 80 13.5v-14v
Ethanol 2x Walbro 520/525 or 2x Bosch BR540 1200* 80 13.5v-14v
*BASE FUEL PRESSURE MUST BE SET @ 40 PSI OR LOWER

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Peak Fuel Pressure (Base Pressure + Boost Pressure)

***Peak Maximum Voltage

Rotary Engine: Reduce Horsepower HP Support Figures by 30% (Must increase fuel injector size by 30%)

 

*PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump" or "Bosch Fuel Pump"

Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above "Fuel Pressure Regulator".

Need A Pre-Wire Electrical Wiring Kit? Aftermarket Industries now offers a motorsport-grade Power Distribution Kit for up to 2 pumps (photo below is for promotional purposes only) see WIRING KITS

Includes the following items: requires assembly (estimated assembly time 30 minutes; assembly guide provided)

  • Billet FC1000 hanger
  • Billet weld-on flange (includes stainless steel fasteners & viton oring)
  • 6 way 90 degree male electrical connector kit (2x female connectors, 12x pins, circlip and o-ring)
  • Billet twin fuel pump bracket (includes stainless steel fasteners and viton rubber insert) - please select either the Walbro or Bosch fuel pump bracket kit
  • Billet swivel fitting, spacer the fuel pump bracket support tube
  • Quick connect fuel pump hose adapter kit
  • Baffle plate kit (includes two billet baffle plate adapters, laser cut baffle plate and stainless steel fasteners)

FREE FUEL SYSTEM ADVICE

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

*These products are designed for race use only and must be correctly fitted by licenced automotive professionals or workshops. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*Fuel tanks MUST not vent to the atmosphere AND is a fire hazard; a charcoal cannister.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Product Specifications

Weight 5 kg
Dimensions 25 × 25 × 25 cm
0
    0
    Your Cart
    Your cart is emptyReturn to Shop