800 Horsepower Fuel System Upgrade (Track Edition)
Product Code: FS1000-MGT-GT500-800HP
$USD 3,045.19
Ford Mustang GT500 (2013+) 800 Horsepower (at the wheels e85) Fuel System Upgrade (Track Edition)
Ford Mustang GT500 (2013+) Surge Tank 800 Horsepower Fuel System / Surge Tank Specifications (Q&A)
- Fits the OEM Fuel Tank?
- Yes - this is a direct replacement of the OEM fuel pump module
- Works with the OEM Fuel Lines?
- The package includes a pre-made, hydraulic crimped motorsport fuel hose kit custom made to project specifications
- Works with the OEM Fuel Rail?
- Yes (if aftermarket market fuel rail is installed, please advise at checkout)
- Works with OEM Fuel Level Sensor?
- Yes
- Is a Wiring Harness Included?
- Yes - Aftermarket Industries now offers a motorsport grade dual relay Plug & Play harness which ONLY uses aerospace grade 22759/16 mil-spec wire
- Does the kit include a Fuel Pressure Regulator?
- Yes
- Surge Protection?
- Yes, the FS1000V3 surge tank features a venturi pump (the OEM fuel pump module does NOT have venturi pump) and provides surge protection down to 10% fuel tank capacity for street condition (15% minimum fuel tank capacity required for track conditions)
- 8000hp At the Wheels?
- YES, this package will support 800hp atw on e85 up to 20psi of boost (base fuel pressure must be set to 40psi - injectors MUST be Bosch Motorsport 1462cc or ID1300cc injectors (injectors not included)
FS1000V2-MGT Surge Tank Installation Notes
- Require HPTuners software & credits (not included) - Consult with your tuner
- OEM Wideband Sensor is recommended
- Boost reference required - positive vacuum
- Aftermarket tune is necessary to ensure correct AFR's and optimal injector performance
- Fuel Flex? Billet fuel flex bypass adapter MUST be used
- Base fuel pressure MUST be set to 40psi
FREE FUEL SYSTEM CONSULTATION
Is all this too overwhelming? Don't worry, you're not alone!
1000 Horsepower Package includes the following items
- FS1000V2-MGT surge tank with 2x Walbro 460 fuel pumps with stainless steel fuel filters (assembled)
- Stainless steel locking ring
- Fuel Hose kit - Plug & Play
- Turbosmart FPR8 fuel pressure regulator
- Milspec wire harness - Plug & Play
- Fuel pressure gauge (120psi)
- Project Management - dedicated Aftermarket Industries technical engineer will be assigned to your project to ensure successful installation and guidance
| FS1000-V3 Fuel Surge Tank Power Support Guidelines | |||||||||
| Fuel Pump | Power HP (Ethanol) | Power HP (Unleaded) | Base Fuel Pressure* (PSI) | Max Boost (PSI) | Peak Fuel Pressure** (PSI) | Voltage*** (v) | |||
| 2x Walbro 460 | 800 | 1100 | 40* (275) kPa | 20 | 60 (414 kPa) | 14.5v | |||
| *BASE FUEL PRESSURE MUST BE SET @ FIGURES STATED OR LOWER TO ACHIEVE HORSEPOWER TARGET (Ensure correct kPa range parameters are set within the ECU) **Maximum Combined Fuel Pressure (Base Fuel Pressure + Boost Pressure) ***Maximum Voltage (DO NOT USE VOLTAGE BOOSTERS) | |||||||||
FREE FUEL SYSTEM CONSULTATION
Is all this too overwhelming? Don't worry, you're not alone!
*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied. *It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.
Product Specifications
| Weight | 4 kg |
|---|---|
| Dimensions | 28 × 28 × 28 cm |
