Loading...

NEED HELP WITH YOUR PROJECT?

1200 Horsepower Fuel System Package (Track Edition)

Product Code: FS1000-VF-1200HP-TE

$USD 2,554.58

Product total
Options total
Grand total

Holden VF 1200 Horsepower Fuel System Upgrade (Track Edition)

Package Includes the following:

  • Aftermarket Industries FS1000 V3 Update Surge Tank
    • direct replacement of OEM module - simply integrate the OEM fuel level sender unit
  • Turbosmart FPR6 Fuel Pressure Regulator (mounted at the rear; non-return setup - includes 4m silicon vacuum hose - positive vacuum reference ONLY)
  • 2x Walbro 525 Fuel Pumps
    • includes 2x Aftermarket Industries stainless steel fuel filters
  • Aftermarket Industries Plug & Play quick connect e85 compatible black nylon braided fuel hose kit
  • Aftermarket Industries Mil-Spec Plug & Play wiring harness
  • Aftermarket Industries Billet Quick Connect Fitting & EFI OEM-Grade Plastic Quick Connect Adapters (rated to 10 bar / 143 PSI)
  • Hobbs Switch Kit - (Option Available) Honeywell - 4psi Hobbs Switch includes 3m 16 AWG 22759/16 milspec wire)

​Package Details & Common Asked Questions

1. Do I Need to Upgrade The OEM Fuel Lines, Fuel Pressure Regulator or Fuel Rail ?

a) Fuel Lines: 

  • Non-Return System (Recommended for Supercharged Applications) 
    • Factory Supply Fuel Line: No - Does not require replacement; the package includes Quick Connector Adapters which integrated directly with the components supplied with the package, this includes the OEM hard fuel line at the rear of the vehicle.

b) Fuel Rail:

  • Non-Return System: No - Testing has revealed that the factory fuel lines and fuel rail is more than sufficient to support the fuel volume without excessive pressurisation.

c) Fuel Pressure Regulator: Yes -The OEM fuel regulator is located with the OEM fuel pump module; this is replaced by the Turbosmart FPR6 fuel pressure regulator (provided with this package)

FS1000-V3 Fuel Surge Tank Power Support Guidelines
Fuel Pump Power HP (Ethanol) Power HP (Unleaded) Base Fuel Pressure* (PSI) Max Boost (PSI) Peak Fuel Pressure**

(PSI)

Voltage***

(v)

2x Walbro 525 1200 1300 40* (275 kPa) 25 65 (448 kPa) 14.5v
*BASE FUEL PRESSURE MUST BE SET @ FIGURES STATED OR LOWER TO ACHIEVE HORSEPOWER TARGET

(Ensure correct kPa range parameters are set within the ECU)

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Maximum Combined Fuel Pressure (Base Fuel Pressure + Boost Pressure)

***Maximum Voltage (DO NOT USE VOLTAGE BOOSTERS)

ADDITIONAL INSTALLATION ADVICE:

  • Aftermarket tune is necessary to ensure correct AFR's and optimal performance
  • OEM FSCM may trigger errors or read lean at WOT due to higher values than OEM settings - please consult with an experienced tuner or ECU hardware & software manufacture; HP Tuners MPVI2 PLUS recommended (visit for pricing: https://www.hptuners.com/mpvi2plus/)
    • FACTORY FUEL PRESSURE SETTINGS MUST BE ADJUSTED/REVISED

​UPGRADE TO THE BOSCH MOTORSPORT 1650CC INJECTORS FOR ONLY $1685 (FLEX-85 COMPATIBLE)

  • Includes 8x (unmodified) GENUINE Bosch Motorsport 1650cc Injectors (Aftermarket Industries in an AUTHORISED DEALER BOSCH MOTORSPORT DEALER)

FREE FUEL SYSTEM CONSULTATION

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Product Specifications

Weight 7 kg
Dimensions 28 × 28 × 28 cm
0
    0
    Your Cart
    Your cart is emptyReturn to Shop