1200 Horsepower Fuel System Package (Track Edition)
Product Code: FS1000-MGT-GT350-1200HP
$USD 2,761.19
Ford Mustang GT350 (2011+) 1200 Horsepower Fuel System Upgrade (Track Edition)
Package Includes the following:
- Aftermarket Industries FS1000-MGT V2 Update Surge Tank
- direct replacement of OEM module - simply integrate the OEM fuel level sender unit
- Turbosmart FPR8 Fuel Pressure Regulator (includes 2m silicon vacuum hose - positive vacuum reference ONLY)
- 2x Walbro 525 Fuel Pumps
- includes 2x Aftermarket Industries stainless steel fuel filters
- Aftermarket Industries Plug & Play quick connect e85 compatible black nylon braided fuel hose kit
- Aftermarket Industries Mil-Spec Plug & Play wiring harness
- Aftermarket Industries Billet Quick Connect Fitting & EFI OEM-Grade Plastic Quick Connect Adapters (rated to 10 bar / 143 PSI)
Package Details & Common Asked Questions
1. Do I Need to Upgrade The OEM Fuel Lines, Fuel Pressure Regulator or Fuel Rail?
a) Fuel Lines:
- Non-Return System (Recommended for Supercharged Applications)
- Factory Supply Fuel Line: No - Does not require replacement; the package includes Quick Connector Adapters which integrated directly with the components supplied with the package, this includes the OEM hard fuel line at the rear of the vehicle.
b) Fuel Rail:
- Non-Return System: No - Testing has revealed that the factory fuel lines, and fuel rail is more than sufficient to support the fuel volume without excessive pressurization.
c) Fuel Pressure Regulator: Yes -The OEM fuel regulator is located with the OEM fuel pump module; this is replaced by the Turbosmart FPR8 fuel pressure regulator (provided with this package)
FS1000-MGT-V2 Fuel Surge Tank Power Support Guidelines | |||||||||
Fuel Pump | Power HP (Ethanol) | Power HP (Unleaded) | Base Fuel Pressure* (PSI) | Max Boost (PSI) | Peak Fuel Pressure**
(PSI) |
Voltage***
(v) |
|||
2x Walbro 525 | 1200 | 1300 | 40* (275 kPa) | 20 | 60 (413 kPa) | 14.5v | |||
*BASE FUEL PRESSURE MUST BE SET @ FIGURES STATED OR LOWER TO ACHIEVE HORSEPOWER TARGET
(Ensure correct kPa range parameters are set within the ECU) (Recommended Fuel Injector: Bosch Motorsport 1650cc) **Maximum Combined Fuel Pressure (Base Fuel Pressure + Boost Pressure) ***Maximum Voltage (DO NOT USE VOLTAGE BOOSTERS) |
ADDITIONAL INSTALLATION ADVICE:
- Aftermarket tune is necessary to ensure correct AFR's and optimal performance
- OEM FSCM may trigger errors or read lean at WOT due to higher values than OEM settings - please consult with an experienced tuner or ECU hardware & software manufacture; HP Tuners MPVI2 PLUS recommended (visit for pricing: https://www.hptuners.com/mpvi2plus/)
- FACTORY FUEL PRESSURE SETTINGS MUST BE ADJUSTED/REVISED
UPGRADE TO THE BOSCH MOTORSPORT 1650CC INJECTORS FOR ONLY $1685 (FLEX-85 COMPATIBLE)
- Includes 8x (unmodified) GENUINE Bosch Motorsport 1650cc Injectors (Aftermarket Industries in an AUTHORISED DEALER BOSCH MOTORSPORT DEALER)
FREE FUEL SYSTEM CONSULTATION
Is all this too overwhelming? Don't worry, you're not alone!
Product Specifications
Weight | 4 kg |
---|---|
Dimensions | 28 × 28 × 28 cm |