FREE FUEL SYSTEM CONSULTATION
Is all this too overwhelming? Don't worry, you're not alone!
BOOK NOW - CLICK HERE
Walbro 525 F90000285 (525) Fuel Pump:
Designed for projects up to 120psi
Award-winning OEM technology
High-pressure, high flow performance
One (1) Walbro 525 F90000285 (525) fuel pump
One (1) Walbro fuel pump strainer
One (1) Walbro wiring harness
*Requires modification to wiring, fuel lines and fuel module (Professional installation recommended)
Add a Stainless Steel Fuel Filter to Your Order: The all-new Aftermarket Industries designed, engineered & manufactured Walbro fuel pump stainless steel fuel filter special features:
200 micron fuel filter / strainer are manufactured to motorsport specifications for enhanced durability and are your best line of defence against premature fuel pump failure. The 200 micron element is designed to ensure there is no restriction at the fuel pump inlet and at the same time provide the necessary protection from harmful debris.
Internal skeleton - unlike the OEM strainer, the Aftermarket Industries Walbro stainless steel motorsport filters are manufactured using an internal injection moulded non-collapsible skeleton which prevent fuel pump failure due to a collapsed filter / strainer - GUARANTEED NOT TO COLLAPSE
Nearly 75% of all aftermarket fuel pump failures are due to contaminants with the fuel system, so be sure to use one of these genuine replacement fuel pump strainers regularly.
*It is advised that you service your fuel pump strainer every time you service your vehicle or every six (6) months if ethanol based fuels are used.
Compatible with unleaded, ethanol and C16.
*Designed specifically for the Walbro F90000285 (525) fuel pump
*12 month warranty
"AVAILABLE OPTIONS" above - "Fuel Filter".
Add a Power Terminal to Your Order: The Aftermarket Industries Fuel Pump Power Bulkhead Terminal (Design Protected) is designed specifically for anyone who is considering upgrading or has upgraded their OEM fuel pump to an aftermarket performance fuel pump (Walbro 255, Walbro 460, Walbro 520 etc). The fact is an OEM electrical connector will NOT support the current & amperage requirements of these aftermarket pumps with most connectors rated at 7.5A; a single Walbro 460, depending on whether it is being used a surge-tank-supply pre pump or as the stand-alone supply pump, will draw 12A at the very least (less than 40psi fuel pressure) and up to 21A under high pressure (80psi+). Simply add the Power Terminal to your order from the "AVAILABLE OPTIONS" above - "Power Terminal".
Fitting Instructions: Simply cut a hole (26-28mm), insert the Power Terminal, secure both ends and connect your wires; he oring has a burst seal strength well beyond 350psi and we guarantee ZERO vapour loss.
Product Specifications: Amperage Capability: Up to 40A per pump, up to two (2) aftermarket fuel pumps (8 AWG Tefzel wire recommended for each Walbro fuel pump)
Need a E85 Compatible & Submersible Fuel Hose? Simply add our 150mm or 150mm Flexible E85 Fuel Hose (includes 2x piece stainless steel ear clamp hose kit) to your order from the AVAILABLE OPTIONS above - "E85 Fuel Hose".