THE SPR1200 V2 SURGE TANK FEATURES THE WORLDS FIRST PLUG & PLAY CONNECTER (INTERNATIONAL DESIGN PROTECTION GRANTED)
SPR1200 V2 SURGE TANK PRODUCT VIDEO
SPR1200 Version 2.0 Surge Tank Special Features:
Triple Fuel Pump Control
The SPR1200 V2 is the worlds first surge tank to feature a 6 way (42 amp per pin) Plug & Play connector to allow complete independent control of three fuel pumps; International Design Protection SDBM-0002100786
Specially moulded Viton fuel pump noise dampener inserts significantly reduce fuel pump vibration to ensure you have a peaceful in-cabin experience
Single Fuel Pump Port
Perfect fuel pressure control (staged fuel pump operation) & fuel pressure stability due to our design protected 3-to-1 internal fuel pump manifold
100% Ethanol Compatible
Zero fuel vapour loss and Zero smell GUARANTEED due to anodising process
Quality & Engineering
Precision machined from aerospace grade 6061-T6 billet aluminium, designed using best practice engineering principles and stress tested to ensure safety for all motorsport applications
Single Pump: Up to 600hp (depending on Brake Specific Fuel Consumption (BSFC): Please complete the Fuel System Calculator located at the top of the page to determine the best solution based on your specific requirements
Twin Pumps: 600hp to 1200hp (depending on BSFC)
Triple Pumps: 800hp to 1500hp (depending on BSFC)
Need a Fuel Pump? The SPR1200v2 is designed for one to three (1-3) fuel pumps; unused ports can be blocked-off using a -8AN block-off fitting.
Compatible Fuel Pumps
Walbro 255 (projects up to 70 psi maximum fuel pressure
Walbro 460 fuel pump (projects up to 85 psi fuel pressure)
Walbro 460 Plus fuel pump (projects between 85 psi and 120 psi fuel pressure)
Walbro 520 / 525 fuel pump (projects up to 120 psi maximum fuel pressure)
*PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump".
Add a Fuel Bulkhead Fitting: A major issue with any aftermarket fuel system is a pressurised overflow from the surge tank back to the OEM fuel tank. A common mistake is the use of adapters; the OEM return in ALL instances is far too small and MUST be modified to ensure the fuel flows freely from the surge tank back into the OEM fuel pump module. We've now developed a super flow profile -8AN fuel bulkhead fitting to address any potential issues. Simply cut a small 20mm hole in the OEM module and secure the bulkhead fitting.
Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above "Fuel Pressure Regulator".
Need the Correct Electrical Connector? High current fuel pumps such as the Walbro 460, and Walbro 520 require a high performance external e85 electrical connector. We've developed our own as the OEM Delphi Apex 2.8mm 6 way connector are NOT e85 compatible - two (2) connectors are required and ARE included FREE.
*Aftermarket Industries products are backed by the worlds largest specialised insurer; Lloyds of London
*These products are designed for race use only and must be correctly fitted by licenced automotive professionals or workshops. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.
*These tanks MUST not be pressurised, If you plan to use a high volume in-tank fuel pump you MUST use a-8AN fitting as the Overflow fitting located at the top of the surge tank. This will allow the fuel to return back to your fuel tank or fuel cell at the same rate fuel is supplied into the surge tank. Some vehicles may require modification of the OEM fuel pump assembly: If you are unsure, please complete the contact form and we will respond to your questions.
*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.