AFTERMARKET INDUSTRIES MAZDA RX7 FD TRACK EDITION SURGE TANK / FUEL SYSTEM (FC1000-FD7S)

SPECIFICATIONS & FEATURES​

• OEM Fitment

  • Extensive engineering & R&D has resulted in a perfect 1:1 fitment with the OEM fuel tank and its internal components.

• Plug & Play Connector

  • ​The FC1000-FD7S features a 30A 6 Way, bio-fuel compatible (unleaded, ethanol and C16), Plug & Play electrical connector (2x female submersible connectors included & 30A pins)​

• Quiet Operation

  • Specially molded Viton fuel pump noise dampener inserts significantly reduce fuel pump vibration to ensure you have a peaceful in-cabin experience

• Single Fuel Pump Port

  • Perfect fuel pressure control (staged fuel pump operation) & fuel pressure stability due to our design protected 2-to-1 internal fuel pump manifold.

• 100% Ethanol Compatible

  • Zero fuel vapor loss and Zero smell GUARANTEED due to anodizing process and materials used

• Venturi System

  • ​The FC1000-FD7S Mazda RX7 FD Track Edition surge tank also includes a Venturi Pump. The Venturi Pump was developed in-house using leading CFD modelling software and techniques (200 data points and 90 hours of continuous simulations) and the result is a Venturi Pump which is able to generate enough vacuum to pull through up to 200lhr of fuel into the bucket which will ensure that the fuel pumps are submerged at all times so there is no possibility of fuel starvation or fuel surge. Note: The Venturi Pump does not draw any current or require any electrical input to operate.

    • ​Vacuum/Siphon rate: 1-4 liters per minute dependent on fuel flow.

• Surge Tank & Active Valve System

  • ​As the name suggests, the Track Edition is designed for motorsport applications and eliminates the requirement for an external surge tank. The FC1000-FD7S features an injection molded surge tank & active valve system designed to trap fuel under acceleration, cornering and braking to ensure constant and uninterrupted fuel supply.

• Quality & Engineering

  • 90% of the components are precision machined from aerospace grade 6061-T6 billet aluminum Aftermarket Industries products are designed using only best practice engineering principles and are stress tested to ensure safety across all motorsport applications.​​

​​​

FREE FUEL SYSTEM CONSULTATION

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

800 Horsepower (Default) Package includes the following items: Assembled

• FC1000-FD7S Track Edition Surge Tank Module 
• Two (2) Walbro 535 fuel pumps (F90000295)
• Turbosmart FPR8 fuel pressure regulator
• Two (2) stainless steel Aftermarket Industries 200-micron fuel filters
• Custom Milspec wire harness made to customer specification
• Project Management - Dedicated Aftermarket Industries technical engineer to assist with installation advice

 see 'AVAILABLE OPTIONS' for the 1000 horsepower package.

*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.