Walbro 460 (F90000267) Fuel Pump

Walbro 460 (F90000267) Fuel Pump

Brand: Walbro
Product Code: F90000267
Availability: In Stock
Price: $225.00AUD
Ex Tax: $225.00AUD

Available Options

Motorsport Power Kit:

E85 Fuel Hose:

Power Terminal:

Walbro 460 (F90000267) Fuel Pump



Walbro 460 F90000267 Fuel Pump: "Turbine style" high-pressure fuel pump part number F90000267 is a recent aftermarket release designed to meet the fuel-hungry demands of modern turbocharging needs. The Walbro 460 can flow close to the same volume as most dual in-tank pumps or large external pumps but in a small, compact and quiet package.

  • Designed for projects up to 85psi

  • Award-winning OEM technology

  • High-pressure, high flow performance

​Package Includes:

  • One (1) Walbro 460 Fuel Pump

  • One (1) Aftermarket Industries Walbro 460 Stainless Steel Fuel Pump Filter

  • One (1) Walbro 460 Wiring Harness (FREE mil-spec UPGRADE: features 2x 150mm 12 AWG 22759/16 wire, 1x Delphi 280 Series 30A connector w/ 2x 30A high current pins)

​*Requires modification to wiring, fuel lines and fuel module (Professional installation recommended)

Add a Motorsport (Mil-Spec) Power (Wiring) Kit to Your Order:  Fuel pump wiring is one of the most neglected and misunderstood aspects of any performance fuel system upgrade.  It's also one of the leading causes of fuel pump failure including engine failure due to incorrectly sized electrical components resulting in fuel pumps that simply won't flow due to resistance

Aftermarket Industries has removed ALL the complexity from the process: We GUARANTEE that this package will meet your requirements or your MONEY BACK! Best of all, we ONLY use premium products and brands manufactured by brands. Includes the following: (requires cut & crimp)

  • 1x 35A High Current Relay (with 30A pins)
  • 1x 30A Fuse w/ LED Light (with 30A pins)
  • 1x Compact Power Distribution Module with Cover & Bracket
  • 4m 12 AWG Mil-Spec 22759/16 wire (white colour) - Fuel Pump Power & Fuel Pump Ground
  • 4m 16 AWG Mil-Spec 22759/16 wire (white colour) - Relay Single & Relay Ground
  • 3x High Current Copper Lugs/Eyelets (Battery Terminal & Ground)


Add a Power Terminal to Your Order: The Aftermarket Industries Fuel Pump Power Bulkhead Terminal (Design Protected) is designed specifically for anyone who is considering upgrading or has upgraded their OEM fuel pump to an aftermarket performance fuel pump (Walbro 255, Walbro 460, Walbro 520 etc). The fact is an OEM electrical connector will NOT support the current & amperage requirements of these aftermarket pumps with most connectors rated at 7.5A; a single Walbro 460, depending on whether it is being used a surge-tank-supply pre pump or as the stand-alone supply pump, will draw 12A at the very least (less than 40psi fuel pressure) and up to 21A under high pressure (80psi+). Simply add the Power Terminal to your order from the "AVAILABLE OPTIONS" above - "Power Terminal".

Fitting Instructions: Simply cut a hole (26-28mm), insert the Power Terminal, secure both ends and connect your wires; he oring has a burst seal strength well beyond 350psi and we guarantee ZERO vapour loss.


Product Specifications: Amperage Capability:  Up to 30A per pump, up to two (2) aftermarket fuel pumps (10 AWG Tefzel wire recommended for each Walbro 460 fuel pump)


Need a E85 Compatible & Submersible Fuel Hose? Simply add our Flexible E85 Fuel Hose; available in 80mm, 100mm, 120mm, 150mm and 200mm (includes 2x piece stainless steel ear clamp hose kit) to your order from the AVAILABLE OPTIONS above - "E85 Fuel Hose".

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: