Loading...

NEED HELP WITH YOUR PROJECT?

Fuel Pump Hanger with Surge Tank (FS1000-SV-AVS)

Product Code: FS1000-SV-AVS

$USD 1,196.35

Product total
Options total
Grand total

The FS1000-SV-AVS offers surge protection right down to 5% fuel tank capacity and eliminates the requirement or need for an external surge tank for street & track driven applications - see PERFORMANCE below.

SPECIFICATIONS & FEATURES

  • Bulkhead Design: We've eliminated the need for 90 degree external fuel hose adapter fittings and simply incorporated a 90 degree thread profile for the Supply & Return ports directly into the bulkhead. The FS1000-SV-AVS also features a stainless steel circlip & weld-on flange (available in aluminium; if you wish to machine your own flange, Aftermarket Industries will provide this upon request to customers who have purchased the FS1000) designed to assist with ease of installation and removal yet provide continuous radical force and secure the surge tank against high rotational speeds.

  • AVS: The FS1000-SV-AVS surge tank features our unique Active Valve System engineered to close & trap fuel under acceleration, cornering and braking. The valves then open, when load is reduced, to allow fuel to rapidly re-fill the surge tank.

  • Venturi Vacuum Pump: The FS1000-SV-AVS surge tank also features an internal Venturi Vacuum Pump. Developed in-house using leading CFD modelling software and techniques (200 data points, 250 man hours and 90 hours of continuous simulation), the FS1000-SV-AVS Venturi Vacuum Pump requires no wiring, draws no current yet is able to generate enough vacuum to pull through, using a fitting located on the lowest point of the surge tank, up to 200 litres per hour of fuel into the surge which will ensure that the fuel pumps are submerged at all times and there is no possibility of fuel starvation or fuel surge.

  • Plug & Play: The FS1000-SV-AVS features a 6 Way, bio-fuel compatible (unleaded, ethanol and C16), Plug & Play electrical connector (2x (female submersible connectors included)​

  • Quiet Operation
    • Specially moulded Viton fuel pump noise dampener inserts significantly reduce fuel pump vibration to ensure you have a peaceful in-cabin experience

  • Single Fuel Pump Port

    • Perfect fuel pressure control (staged fuel pump operation) & fuel pressure stability due to our design protected 2-to-1 internal fuel pump manifold.

  • 100% Ethanol Compatible

    • Zero fuel vapour loss and Zero smell GUARANTEED due to anodising process and materials used

  • Quality & Engineering

    • 90% of the components are precision machined from aerospace grade 6061-T6 billet aluminium & the lightweight surge tank is manufactured using a composite injection moulded plastic commonly used in Formula One and Aerospace applications. Aftermarket Industries products are designed using only best practice engineering principles and are stress tested to ensure safety across all motorsport applications.​​

FS1000 Fuel Pump Hanger Surge Tank Power Support Table
Fuel Type Fuel Pump Power HP* Pressure PSI** Voltage***
Ethanol 1x Walbro 460 500 70 13.5v
Ethanol 1x Walbro 520 650* 70 13.5v
Ethanol 2x Walbro 460 900* 85 13.5v
Ethanol 2x Walbro 520 1200* 85 13.5v

*BASE FUEL PRESSURE MUST BE SET TO 40 PSI OR LOWER

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Maximum Peak Fuel Pressure (Base Pressure + Boost Pressure)

***Maximum Voltage

Rotary Engine: Reduce Horsepower HP Support Figures by 30% - (Must also increase injector size by 30%)

  • Fuel level sender required required (not supplied)
  • Aftermarket tune is necessary to ensure correct AFR's and optimal performance
  • Wiring harness NOT provided and MUST be wired by professional & certified automotive electrician AND STRICTLY TO AFTERMARKET INDUSTRIES SPECIFICATIONS
  • REQUIRES PROFESSIONAL TUNE & MAY ALSO REQUIRE BY-PASS OF ECU FACTORY FUEL PUMP SETTINGS

Wiring Recommendation: Required For WARRANTY

Fuel Pump Qty Main Power Wire Fuel Pump Power Wire Relay Wire Size Relay Size Fuel Pump Circuit Breaker
Single Pump 10 AWG Milspec 22759/16 10 AWG Milspec 22759/16 16 AWG Milspec 22759/16 35A-50A

25A Circuit Breaker or Fuse

Twin Pump 6 AWG Main Wire Milspec  22759/16 (60A Type 1 Circuit Breaker) 10 AWG Milspec 22759/34 16 AWG Milspec 22759/16 35A-50A 25A Circuit Breaker or Fuse
  • Electrical Wire & Circuit Size Formula
    • Circuit Breaker/Fuse Size: 125% (1.25x) total Peak Current (Amps)
      • ​Circuit Breaker/Fuse must NOT exceed wire current rating
    • Wire Size: 150% (1.5x) total Peak Current (Amps)
    • Relay Size: 225% (2.25x) total Peak Current (Amps)

Do I Need To Stage My Fuel Pumps? YES! Fuel pump operation MUST be staged via a Hobbs Pressure Switch, Aftermarket ECU or PDM. See AVAILABLE OPTIONS above - "Hobbs Switch"

Specifications:

  • 4 PSI Hobbs  Switch
  • 24" inch harness with 2x female Delphi 280 Series Connectors & 1x male Delphi 280 Series Connector (includes pins)

Power Distribution Kit - See AVAILABLE OPTIONS above - "Power Distribution Kit"

  • Aftermarket Industries now offers a motorsport-grade Power Distribution Kit for up to 2 pumps (photo below is for promotional purposes only - kit requires assembly, cut & crimp - Select Single or Dual fuel pumps from the AVAILABLE OPTIONS above)

FREE FUEL SYSTEM CONSULTATION

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

Fuel System Advice (FREE)

Package includes the following items: Requires Assembly (estimated assembly time 30 minutes; assembly guide provided)

  • FS1000-SV-AVS billet bulkhead (machined from aircraft grade 6061-T6 billet aluminium)
  • Billet (6061-T6) twin (2) fuel pump bracket (includes stainless steel fasteners and Viton rubber insert/s)

  • Billet (6061-T6) fuel pump manifold

  • Billet (6061-T6) Venturi vacuum pump inlet adapter

  • Billet (6061-T6) Venturi vacuum pump

  • Billet two (2) piece fuel bucket (upper section machined from 6061-T6 grade billet aluminium, lower section injection moulded)

  • Bucket (POM) bottom plate with four (4) injection moulded (POM) floater valves

  • Viton rubber o-rings included

  • Aftermarket Industries six (6) way male electrical connector with two (2) female connectors and 12 pins

  • Two (2) stainless steel Aftermarket Industries 200 micron fuel filters.

​Note: Fuel Pressure Regulator and Fuel Pumps ARE NOT INCLUDED in this package and can be added to your order ; see 'AVAILABLE OPTIONS'.

*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Product Specifications

Weight 5 kg
Dimensions 20 × 20 × 20 cm

Reviews

There are no reviews yet.

Be the first to review “Fuel Pump Hanger with Surge Tank (FS1000-SV-AVS)”

Your email address will not be published. Required fields are marked *

0
    0
    Your Cart
    Your cart is emptyReturn to Shop