Fuel Pump Hanger (FC1000 Track Edition) Single & Twin Fuel Pump

Fuel Pump Hanger (FC1000 Track Edition) Single & Twin Fuel Pump

Brand: Aftermarket Industries
Product Code: FC1000-TE
Availability: In Stock
Price: $2,185.00AUD
Ex Tax: $2,185.00AUD

Available Options

Hobbs Switch:

Power Distribution Kit:

Stainless Steel Fuel Pump Filter:

Bosch Fuel Pump:

* Fuel Pump Bracket:

Walbro Fuel Pump:

Fuel Pressure Regulator: Horsepower Rating:

Fuel Pump Hanger (FC1000 Track Edition) Single & Twin Fuel Pump Fuel Pump Hanger (FC1000 Track Edition) Single & Twin Fuel Pump Fuel Pump Hanger (FC1000 Track Edition) Single & Twin Fuel Pump Fuel Pump Hanger (FC1000 Track Edition) Single & Twin Fuel Pump Fuel Pump Hanger (FC1000 Track Edition) Single & Twin Fuel Pump Fuel Pump Hanger (FC1000 Track Edition) Single & Twin Fuel Pump



FC1000-TE (Track Edition) Billet Oval Fuel Pump Hanger Special Features

Single Fuel Pump Port

  • 6AN Fuel ports

  • 8AN Vent/Breather port

  • Perfect fuel pressure control

  • Staged fuel pump operation

  • Superior fuel pressure stability due to our design protected 2-1 fuel pump manifold

Single Venturi Pump

  • The FC1000-TE (1x Venturi) features high-vacuum Venturi Vacuum Pump.
  • Developed in-house using leading CFD modelling software and techniques (200 data points, 250 man hours and 90 hours of continuous simulation)
  • The Venturi Vacuum Pump requires no wiring, draws no current yet is able to generate enough vacuum up to 220 litres per hour of fuel and deliver fuel into the fuel pump pick-up zone, located within the surge tank, to ensure that the fuel pumps are submerged at all times and there is no possibility of fuel starvation or fuel surge.

Surge Tank / Active Valve System
  • Active Valve System: The FC1000-TE surge tank features the Aftermarket Industries Active Valve System; The AFVS are engineered to close and trap fuel under acceleration, cornering and breaking. The valves then open, when load is reduced, to allow fuel to rapidly re-fill the surge tank to eliminate fuel surge and/or fuel starvation.
  • 8AN vent/breather port for maximum venting under heavy load
  • Note: it is advised that tank is vented to charcoal canister and NOT atmosphere

Plug & Play

  • The FC1000-TE features the Aftermarket Industries 6 way 30A (per pin) Plug & Play electrical connector to allow independent control of up to three fuel pumps.

Wiring Recommendation: Required For WARRANTY

Fuel Pump Qty Main Power Wire

Fuel Pump Power Wire

Relay Wire Size

Relay Size Fuel Pump Circuit Breaker
Single Pump 10 AWG Tefzel Mil-Spec 22759/34 10 AWG Tefzel Mil-Spec 22759/34 16 AWG Tefzel Mil-Spec 22759/16 35A-50A


Circuit Breaker or Fuse

Twin Pump 4 -6 AWG Main Wire Tefzel Mil-Spec 22759/16 (50A-60A Circuit Breaker/Fuse) 10 AWG Tefzel Mil-spec 22759/34 16 AWG Tefzel Mil-Spec 22759/16 50A 25A-30A Circuit Breaker or Fuse
  • Electrical Wire & Circuit Size Formula
    • Circuit Breaker/Fuse Size: 125% (1.25x) total Peak Current (Amps)
      • ​Circuit Breaker/Fuse must NOT exceed wire current rating
    • Wire Size: 150% (1.5x) total Peak Current (Amps)
    • Relay Size: 225% (2.25x) total Peak Current (Amps)

Bio-Fuel Compatible

  • Zero fuel vapour loss

  • Zero fuel smell GUARANTEED due to anodising process

  • Unleaded, Ethanol, C16


  • Precision machined from aerospace grade 6061-T6 billet aluminium, designed using best practice engineering principles and stress tested to ensure maximum safety for all motorsport applications

Compatible Fuel Pumps

  • Walbro 255

  • Walbro 460

  • Walbro 520 / 525

  • Bosch BR540 / DW400

  • PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump" or "Bosch Fuel Pump".

Weld-On Flange

  • Machined from 6061-T6 billet aluminium (includes viton o-ring and stainless steel fasteners)

Height Adjustable

  • Fuel pump height is adjustable between 254mm (10 inches) to 304mm (12 inches) internal depth/height

Power Support Table

Fuel Type
Fuel Pump
Power HP*
Peak Fuel Pressure PSI**

1x Walbro 460






1x Bosch 520/520





2x Walbro 460


2x Walbro 520/525


(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Total Peak Fuel Pressure (Base Pressure + Boost Pressure)

***Peak Voltage

Rotary Engine: Reduce Horsepower HP Support Figures by 30%


*PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump" or "Bosch Fuel Pump".

Walbro 460 (F90000274) Fuel Pump

Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above "Fuel Pressure Regulator".

Turbosmart Regulator FPR2000

Need the Correct Electrical Connector? High current draw fuel pumps that require a high performance external e85 electrical connector. We've developed our own as the OEM Delphi Apex 2.8mm 6 way connector are NOT e85 compatible - two (2) connectors are required and ARE included FREE (includes 6x 10 AWG (30A) Metri-Pack 280 series pins per connector and is designed SPECIFICALLY for 10 AWG (30A) Tefzel Mil-Spec 22759/34 wire.

Aftermarket Industries 6 Way Connector (Female)

Need Power? Aftermarket Industries now offers a motorsport-grade Power Distribution Kit for up to 3 pumps (photo below is for promotional purposes only - kit requires assembly, cut & crimp) see AVAILABLE OPTIONS above - "Power Distribution Kit"

​​​Dual Relay Power Distribution Module (DIY)

​Do I Need To Stage My Fuel Pumps? YES! Fuel pump operation MUST be staged via a Hobbs Pressure Switch, Aftermarket ECU or PDM. See AVAILABLE OPTIONS above - "Hobbs Switch"


Hobbs Pressure Switch

Need a Stainless Steel Fuel Filter (Walbro Pumps Only)? Aftermarket Industries developed the first and only 200  micron fuel filter / strainer designed for motorsport conditions and bio-fuels such as ethanol (e85): see AVAILABLE OPTIONS above - "Stainless Steel Walbro Fuel Filter" (select the desired quantity)

Includes the following items: requires Assembly (estimated assembly time 30 minutes; assembly guide provided)

  • Billet FC1000 hanger

  • Billet FC1000 weld-on flange (includes viton o-ring and fasteners

  • 6 way 90 degree male electrical connector kit (2x female connectors, 12x pins, circlip and viton o-ring)

  • Billet dual fuel pump bracket (includes stainless steel fasteners and viton rubber insert) - please select either the Walbro or Bosch fuel pump bracket kit

  • Billet swivel fitting

  • Billet venturi vacuum pump and surge tank kit (includes billet 3/8 billet quick connect fitting & plastic quick connect hose adapter kit)

  • Baffle plate kit (includes billet baffle plate adapter, laser cut baffle plate and stainless steel fasteners)


Is all this too overwhelming? Don't worry, you're not alone!


Fuel System Advice (FREE)

*These products are designed for race use only and must be correctly fitted by licenced automotive professionals or workshops. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*Fuel tanks MUST not vent to the atmosphere AND is a fire hazard; a charcoal cannister.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: