Currency
Currency:
Mazda RX7 FD Fuel System (Track Edition)

Mazda RX7 FD Fuel System (Track Edition)

Brand: Aftermarket Industries
Product Code: FC1000-FD7-TE
Availability: In Stock
Price: $2,045.00AUD
Ex Tax: $2,045.00AUD

Available Options


Power Distribution Kit:

Hobbs Switch:

Crimp Tool:

Walbro Fuel Pump:

Fuel Pressure Regulator: Horsepower Rating:

Qty:
Mazda RX7 FD Fuel System (Track Edition) Mazda RX7 FD Fuel System (Track Edition) Mazda RX7 FD Fuel System (Track Edition) Mazda RX7 FD Fuel System (Track Edition)

AFTERMARKET INDUSTRIES MAZDA RX7 FD TRACK EDITION SURGE TANK / FUEL SYSTEM (FC1000-FD7S) SPECIFICATIONS & FEATURES

  • OEM Fitment

    • Extensive engineering & R&D has resulted in a perfect 1:1 fitment with the OEM fuel tank and its internal components.

  • Plug & Play Connector

    • The FC1000-FD7S features a 30A 6 Way, bio-fuel compatible (unleaded, ethanol and C16), Plug & Play electrical connector (2x female submersible connectors included & 30A pins)​

  • Quiet Operation

    • Specially moulded Viton fuel pump noise dampener inserts significantly reduce fuel pump vibration to ensure you have a peaceful in-cabin experience

  • Single Fuel Pump Port

    • Perfect fuel pressure control (staged fuel pump operation) & fuel pressure stability due to our design protected 2-to-1 internal fuel pump manifold.

  • 100% Ethanol Compatible

    • Zero fuel vapour loss and Zero smell GUARANTEED due to anodising process and materials used

  • Venturi System

    • The FC1000-FD7S Mazda RX7 FD Track Edition surge tank also includes a Venturi Pump. The Venturi Pump was developed in-house using leading CFD modelling software and techniques (200 data points and 90 hours of continuous simulations) and the result is a Venturi Pump which is able to generate enough vacuum to pull through up to 200lhr of fuel into the bucket which will ensure that the fuel pumps are submerged at all times so there is no possibility of fuel starvation or fuel surge. Note: the Venturi Pump does not draw any current or require any electrical input to operate.

      • ​Vacuum/Siphon rate: 1-4 litres per minute dependant on fuel flow.

  • Surge Tank & Active Valve System

    • As the name suggests, the Track Edition is designed for motorsport applications and eliminates the requirement for an external surge tank. The FC1000-FD7S features an injection moulded surge tank & active valve system designed to trap fuel under acceleration, cornering and braking to ensure constant and uninterrupted fuel supply.

  • Quality & Engineering

    • 90% of the components are precision machined from aerospace grade 6061-T6 billet aluminium Aftermarket Industries products are designed using only best practice engineering principles and are stress tested to ensure safety across all motorsport applications.​​

​​

Mazda RX7 FD Track Edition Surge Tank Power Support Table

Fuel Type

Fuel Pump

Power HP*

Peak Fuel Pressure PSI**

Voltage***

Ethanol

1x Walbro 460

300*

70

13.5v

Ethanol

1x Walbro 520/525

400*

70

13.5v

Ethanol

2x Walbro 460

700*

80

13.5v

Ethanol

2x Walbro 520/525

800*

80

13.5v

*BASE FUEL PRESSURE MUST BE SET TO 45 PSI OR LOWER

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Peak Fuel Pressure (Base Pressure + Boost Pressure)

***Peak Voltage

  • Mazda OEM fuel level sender required (not supplied)

  • Aftermarket tune is necessary to ensure correct AFR's and optimal performance

  • Wiring harness NOT provided and MUST be wired by professional & certified automotive electricianAND STRICKTLY TO AFTERMARKET INDUSTRIES SPECIFICATIONS
  • REQUIRES PROFESSIONAL TUNE & MAY ALSO REQUIRE BY-PASS OF ECU FACTORY FUEL PUMP SETTINGS

Wiring Recommendation: Required For WARRANTY

Fuel Pump Qty Main Power Wire Fuel Pump Power Wire Relay Wire Size Relay Size Fuel Pump Circuit Breaker
Single Pump 10 AWG Tefzel Mil-Spec 22759/34 10 AWG Tefzel Mil-Spec 22759/34 16 AWG Tefzel Mil-Spec 22759/16 35A-50A

25A-30A Circuit Breaker or Fuse

Twin Pump 4 AWG (75A) Main Wire Tefzel Mil-Spec 22759/16 (50A-60A Circuit Breaker/Fuse) 10 AWG Tefzel Mil-Spec 22759/34 16 AWG Tefzel Mil-Spec 22759/16 50A 25A-30A Circuit Breaker or Fuse
  • Electrical Wire & Circuit Size Formula
    • Circuit Breaker/Fuse Size: 125% (1.25x) total Peak Current (Amps)
      • ​Circuit Breaker/Fuse must NOT exceed wire current rating
    • Wire Size: 150% (1.5x) total Peak Current (Amps)
    • Relay Size: 225% (2.25x) total Peak Current (Amps)

Do I Need To Stage My Fuel Pumps? YES! Fuel pump operation MUST be staged via a Hobbs Pressure Switch, Aftermarket ECU or PDM. See AVAILABLE OPTIONS above - "Hobbs Switch"

Specifications:

  • 4 PSI Hobbs  Switch
  • 24" inch harness with 2x female Delphi 280 Series Connectors & 1x male Delphi 280 Series Connector (includes pins)

Hobbs Pressure Switch

 

Power Distribution Kit - See AVAILABLE OPTIONS above - "Power Distribution Kit"

  • Aftermarket Industries now offers a motorsport-grade Power Distribution Kit for up to 2 pumps (photo below is for promotional purposes only - kit requires assembly, cut & crimp - Select Single or Dual fuel pumps from the AVAILABLE OPTIONS above)
  • Package Includes (click on links below for package details)

 

 

​​​Dual Relay Power Distribution Module (DIY)

 

FREE FUEL SYSTEM CONSULTATION

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

Fuel System Advice (FREE)

Package includes the following items: Requires Assembly (estimated assembly time 30 minutes; assembly guide provided)

  • FC1000-FD7S billet bulkhead (machined from aircraft grade 6061-T6 billet aluminium)

  • Billet (6061-T6) twin (2) fuel pump bracket (includes stainless steel fasteners and Viton rubber insert/s)

  • Billet (6061-T6) fuel pump manifold

  • Billet Fuel Level Sensor Adapter Kit (include plastic CNC machined adapter)

  • Laser cut & CNC folded 5005 grade aluminium OEM fuel level sender bracket

  • Billet quick connect fuel pump fittings & high pressure quick connect fuel pump hose kit (includes stainless steel ear-clamps)

  • Surge tank kit (includes various components; baffle plate, billet adapters and lock plates)

  • Venturi pump kit

  •  Viton rubber o-rings included

  • Aftermarket Industries six (6) way male electrical connector with two (2) female connectors and 12 pins

  • Fuel level sender wire kit (requires cut/crimp: includes 16 AWG Mil-Spec 22759/16 wire and high current solid copper tinned lugs)

  • Two (2) stainless steel Aftermarket Industries 200 micron fuel filters.

​Note: Fuel Pressure Regulator and Fuel Pumps ARE NOT INCLUDED in this package and can be added to your order ; see 'AVAILABLE OPTIONS'.

*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: