Currency
Currency:
Holden VF 1000 Horsepower Fuel System Package

Holden VF 1000 Horsepower Fuel System Package

Brand: Aftermarket Industries
Product Code: FS1000-VF-1000HP
Availability: In Stock
Price: $3,345.00AUD
Ex Tax: $3,345.00AUD

Available Options


* Bosch Injector Upgrade:

* VE Specification:

* Fuel Type:

* Vehicle Body Type:

Qty:
Holden VF 1000 Horsepower Fuel System Package Holden VF 1000 Horsepower Fuel System Package Holden VF 1000 Horsepower Fuel System Package Holden VF 1000 Horsepower Fuel System Package Holden VF 1000 Horsepower Fuel System Package Holden VF 1000 Horsepower Fuel System Package Holden VF 1000 Horsepower Fuel System Package Holden VF 1000 Horsepower Fuel System Package Holden VF 1000 Horsepower Fuel System Package

Package Includes the following

  • Aftermarket Industries FS1000 V3 Update Surge Tank (direct replacement of OEM module - FS1000 V3 requires assembly)
  • Turbosmart FPR2000 Fuel Pressure Regulator (mounted at the rear; non-return setup - includes stainless steel 4m teflon vacuum hose & adapter)
  • 2x Walbro 460 Fuel Pumps (Select the correct fuel pump above (see 'AVAILABLE OPTIONS' above) refer to the Horsepower Support Table below)
  • Earls Super-Stock 3/8 250 PSI High Pressure Fuel Hose (10m - compatible with ALL fuel types - hose supplied in 10m roll, required cut and installation)
  • Mil-Spec Plug & Play wiring harness
  • Aftermarket Industries Billet Quick Connect Fitting & EFI OEM-Grade Plastic Quick Connect Adapters (rated to 10 bar / 143 PSI)

Holden VE 700 Horsepower Fuel System Package

​Package Details & Common Asked Questions

1. Do I Need to Upgrade The OEM Fuel Lines, Fuel Pressure Regulator or Fuel Rail ?

a) Fuel Lines: 

  • Non-Return System (Recommended for Supercharged Applications) 
    • Factory Supply Fuel Line: No - Does not require replacement; the package includes Quick Connector Adapters which integrated directly with the components supplied with the package, this includes the OEM hard fuel line at the rear of the vehicle.
    • Installation Notes:
      • Simply cut the rubber hose provided into correct lengths & install the Plastic Quick Connect Adapters (it is your responsibility to ensure hoses, adapters and fittings are correctly installed)

b) Fuel Rail:

  • Non-Return System: No - Testing has revealed that the factory fuel lines and fuel rail is more than sufficient to support the fuel volume without excessive pressurisation.

c) Fuel Pressure Regulator: Yes -The OEM fuel regulator is located with the OEM fuel pump module; this is replaced by the Turbosmart FPR1200 fuel pressure regulator (provided with this package)

  • Installation Notes:
    • Install the FPR1200 Regulator in safe location are the rear of the undercarriage where it will not be subjected to debris or potential impact.
    • The package includes a stainless steel braided vacuum hose & 1/8NPT adapter to minimum vacuum leak

FS1000-V3 Fuel Surge Tank Power Support Guidelines

Fuel Pump

Power HP (Ethanol)

Power HP (Unleaded)

Base Fuel Pressure* (PSI)

Boost (PSI)

Peak Fuel Pressure**

(PSI)

Voltage***

(v)

2x Walbro 460

1000

1100

50*

20

70 14.5v

*BASE FUEL PRESSURE MUST BE SET @ FIGURES STATED OR LOWER TO ACHIEVE HORSEPOWER TARGET

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Maximum Combined Fuel Pressure (Base Fuel Pressure + Boost Pressure)

***Maximum Voltage

 

ADDITIONAL INSTALLATION ADVICE:

  • Aftermarket tune is necessary to ensure correct AFR's and optimal performance
  • OEM FSCM may trigger errors or read lean at WOT due to higher values than OEM settings - please consult with an experienced tuner or ECU hardware & software manufacture; HP Tuners MPVI2 PLUS recommended (visit for pricing: https://www.hptuners.com/mpvi2plus/)
  • REQUIRES BY-PASS OF ECU FACTORY FUEL PUMP SETTINGS

WIRING (PLUG & PLAY):

Aftermarket Industries now offers a professional motorsport-grade (kit requires installation by a qualified automotive electrician - select Vehicle Body Type)

  • Package Includes
    • Mil-Spec Aviation-grade Wire (fuel pump power & fuel pump ground)
    • Mil-Spec Aviation-grade Wire (relay signal & ground)
    • 2x 35A Relays
    • 2x 30A Fuses
    • High-current wire lugs
    • Motorsport-grade connectors

​UPGRADE TO THE BOSCH MOTORSPORT 1650CC INJECTORS FOR ONLY $1485 (FLEX-85 COMPATIBLE)

  • Includes 8x (unmodified) GENUINE Bosch Motorsport 1650cc Injectors (Aftermarket Industries in an AUTHORISED DEALER BOSCH MOTORSPORT DEALER)

Bosch 1650cc
 

FREE FUEL SYSTEM CONSULTATION

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

Fuel System Advice (FREE)

*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: