After hundreds of hours of design, engineering & real-world testing, we are proud to announce the FS1000-MGT drop-in fuel system upgrade for the Ford Shelby GT550 2013 + 2014 (S197) which now offers surge protection right down to 5% fuel tank capacity and eliminates the requirement or need for an external surge tank for street & track driven applications - see PERFORMANCE below.
We've determined that the FS1000-MGT offers estimated savings of between $2,500-$3,500; the costs associated with installation of a surge tank (fuel lines, fuel fittings and labour).
SPECIFICATIONS & FEATURES
Bulkhead Design: We've eliminated the need for 90 degree external fuel hose adapter fittings and simply incorporated a 90 degree thread profile for the Supply & Return ports directly into the bulkhead
Larger Floater Valves:The AVS are engineered to close and trap fuel under acceleration, cornering and breaking. The valves then open, when load is reduced, to allow fuel to rapidly re-fill the surge tank 83% quicker than the OEM system.
Venturi Pump: The FS1000-MGT also includes a Venturi Pump. The Venturi Pump was developed using leading CFD modelling software and techniques (200 data points and 90 hours of continuous simulations) and the result is a Venturi Pump which is able to generate enough vacuum to pull through up to 200lhr of fuel into the bucket which will ensure that the fuel pumps are submerged at all times so there is no possibility of fuel starvation or fuel surge.
Plug & Play?
While the drop-in module isn't "Plug & Play" per se, the installation can be completed in a mater of hours and will depend on whether the fuel system is setup as a return or non-return system.
Do I Need to Upgrade The Fuel Lines, Fuel Pressure Regulator or Fuel Rail ?
a) Fuel Lines:
Non-Return System (Recommended for Supercharged Applications): The factory fuel supply line is sufficient to support the flow & output of compatible fuel pumps (Walbro 255, 460 and 520 fuel pumps); please note, an external fuel pressure regulator MUST be installed and a new fuel pressure regulator return fuel line installed between the regulator and the FS1000-MGT fuel pump module (-6AN recommended)
Return System (Recommended for Turbocharged Applications): The factory fuel supply is sufficient to support the flow & output of the compatible fuel pumps HOWEVER the fuel rail MUST be upgraded and a return fuel line installed (-6AN return line recommended).
b) Fuel Rail:
Non-Return System: Testing has revealed that the factory fuel lines and fuel rail is more than sufficient to support the fuel volume without excessive pressurisation.
Return System: Yes, the factory fuel rail MUST be upgraded.
c) Fuel Pressure Regulator: Yes -The OEM fuel regulator is far too small must be upgraded. See AVAILABLE OPTIONS above- "Fuel Pressure Regulator" & "Fuel Rail Adapter Kit"
FS1000-MGT Special Features
Specially moulded Viton fuel pump noise dampener inserts significantly reduce fuel pump vibration to ensure you have a peaceful in-cabin experience
Single Fuel Pump Port
Perfect fuel pressure control (staged fuel pump operation) & fuel pressure stability due to our design protected 2-to-1 internal fuel pump manifold.
100% Ethanol Compatible
Zero fuel vapour loss and Zero smell GUARANTEED due to anodising process and materials used
Quality & Engineering
Precision machined from aerospace grade 6061-T6 billet aluminium & lightweight fuel bucket is designed using best practice engineering principles and stress tested to ensure safety for all motorsport applications.
Floater valves designs to trap fuel in the fuel bucket
Venturi (pump) tube engineered specifically for the Mustang models.
*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.
*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.