Ford Shelby GT550 Surge Tank Swirl Pot Fuel System

Ford Shelby GT550 Surge Tank Swirl Pot Fuel System

Brand: Aftermarket Industries
Product Code: FS1000-MGT-SHELBY-550
Availability: In Stock
Price: $1,885.00AUD
Ex Tax: $1,885.00AUD

Available Options


* Walbro Fuel Pump: Horsepower & Fuel Pressure Rating (E85):

* Fuel Pressure Regulator: Horsepower Rating & Pressure Rating:

Qty:

*PRE-ORDER NOW - November 2020 Delivery

After hundreds of hours of design, engineering & real-world testing, we are proud to announce the FS1000-MGT drop-in fuel system upgrade for the Ford Shelby GT550 2013 + 2014 (S197)  which now offers surge protection right down to 5% fuel tank capacity and eliminates the requirement or need for an external surge tank for street & track driven applications - see PERFORMANCE below.

Cost Savings:

We've determined that the FS1000-MGT offers estimated savings of between $2,500-$3,500; the costs associated with installation of a surge tank (fuel lines, fuel fittings and labour).

SPECIFICATIONS & FEATURES

  • Bulkhead Design: We've eliminated the need for 90 degree external fuel hose adapter fittings and simply incorporated a 90 degree thread profile for the Supply & Return ports directly into the bulkhead

  • Larger Floater Valves: The FS1000-MGT features not only 100% larger fuel floater valves over the OEM fuel pump module but 4 valves versus the 1 valve included in the OEM design) which significantly reduces to time required to re-fill the bucket by 300%.

  • Venturi Pump: The FS1000-MGT also includes a Venturi Pump. The Venturi Pump was developed using leading CFD modelling software and techniques (200 data points and 90 hours of continuous simulations) and the result is a Venturi Pump which is able to generate enough vacuum to pull through more than 200lhr of fuel into the bucket which will ensure that the fuel pumps are submerged at all times so there is no possibility of fuel starvation or fuel surge.

Plug & Play?

While the drop-in module isn't "Plug & Play" per se, the installation can be completed in a mater of hours and will depend on whether the fuel system is setup as a return or non-return system.

Do I Need to Upgrade The Fuel Lines, Fuel Pressure Regulator or Fuel Rail ?

a) Fuel Lines: 

  • Non-Return System: The factory fuel supply line is sufficient to support the flow & output of compatible fuel pumps (Walbro 255, 460 and 520 fuel pumps); please note, an external fuel pressure regulator MUST be installed and a new fuel pressure regulator return fuel line installed between the regulator and the FS1000-MGT fuel pump module (-6AN recommended)
  • Return System: The factory fuel supply is sufficient to support the flow & output of the compatible fuel pumps HOWEVER the fuel rail MUST be upgraded and a return fuel line installed (-6AN return line recommended).

b) Fuel Rail:

  • Non-Return System: Testing has revealed that the factory fuel lines and fuel rail is more than sufficient to support the fuel volume without excessive pressurisation.
  • Return System: Yes, the factory fuel rail MUST be upgraded.

c) Fuel Pressure Regulator: Yes -The OEM fuel regulator is far too small must be upgraded. See AVAILABLE OPTIONS above- "Fuel Pressure Regulator" & "Fuel Rail Adapter Kit"

FS1000-MGT Special Features

  • Quiet Operation
    • Specially moulded Viton fuel pump noise dampener inserts significantly reduce fuel pump vibration to ensure you have a peaceful in-cabin experience
  • Single Fuel Pump Port
    • Perfect fuel pressure control (staged fuel pump operation) & fuel pressure stability due to our design protected 2-to-1 internal fuel pump manifold.
  • 100% Ethanol Compatible
    • Zero fuel vapour loss and Zero smell GUARANTEED due to anodising process and materials used
  • Quality & Engineering
    • Precision machined from aerospace grade 6061-T6 billet aluminium & lightweight fuel bucket is designed using best practice engineering principles and stress tested to ensure safety for all motorsport applications.
    • Floater valves designs to trap fuel in the fuel bucket
    • Venturi (pump) tube engineered specifically for the Holden VE & VF models.
FS1000 Fuel Surge Tank Power Support Table
Fuel Type Fuel Pump Power HP Pressure PSI Voltage
Ethanol 1x Walbro 460 500 70 13.5v
Ethanol 1x Walbro 520 650 80 13.5v
Ethanol 2x Walbro 460 850 70 14v
Ethanol 2x Walbro 520 1200 80 14v
*ADDITIONAL INSTALLATION ADVICE:
  • OEM Wideband Sensor is recommended 
  • Aftermarket tune is necessary to ensure correct AFR's and optimal performance
  • Wiring harness NOT provided and MUST be wired by professional & certified automotive electrician
  • Wiring Recommendation (high-level based on anticipated high current draw applications):
    • Single Pump: 10 AWG Tefzel Mil-spec wire (50A relay)
    • Twin Pump: 4 AWG main wire; 2x 10 AWG Tefzel Mil-spec wires (2x 50A relays)

  • REQUIRES PROFESSIONAL TUNE & MAY ALSO REQUIRE BY-PASS OF ECU FACTORY FUEL PUMP SETTINGS

Package includes the following items:

  • FS1000-MGT bulkhead (machined from aircraft grade 6061-T6 billet aluminium))
  • Billet (6061-T6) twin (2) fuel pump bracket (includes stainless steel fasteners and Viton rubber insert/s)
  • Two (2) billet (6061-T6) 3/8 push-lock fuel pump adapter fittings 
  • Billet (6061-T6) fuel pump manifold
  • Billet (6061-T6) Venturi inlet adapter
  • Billet (6061-T6) Venturi (pump) tube
  • Billet two (2) piece fuel bucket (machined from 6061-T6 grade billet aluminium)
  • Bucket (POM) bottom plate with four (4) injection moulded (POM) floater valves
  • Viton rubber o-rings included
  • Aftermarket Industries six (6) way male electrical connector with two (2) female connectors and 12 pins
  • E85 compatible fuel pump/bulkhead hose
  • Two (2) stainless steel Aftermarket Industries 200 micron fuel filters.
  • Fuel level sender NOT included - OEM sender to be attached to FS1000-MGT module as per illustrations.

​Note: Fuel Pressure Regulator and Fuel Pumps ARE NOT INCLUDED in this package and can be added to your order ; see 'AVAILABLE OPTIONS'.

*Aftermarket Industries products are backed by the worlds largest specialised insurer; Lloyds of London

*These products must be correctly fitted by "Certified Installer" workshops and partners. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: