Superior fuel pressure stability due to our design protected 3-to-1 fuel pump manifold
This is the only production fuel tank which features 12 individual fuel chambers, similar to Formula 1, designed to provide superior baffling and surge protection under heavy acceleration, braking and cornering and eliminates the requirement for an external surge tank.
Dual 8AN vent/breather port for maximum venting under heavy load
Note: it is advised that tank is vented to charcoal canister and NOT atmosphere
Plug & Play
The FC1500-75 features the Aftermarket Industries 6 way (42A) Plug & Play electrical connector to allow independent control of up to three fuel pumps.
Zero fuel vapour loss
Zero fuel smell GUARANTEED due to anodising process
75 litre capacity - (Walbro & Bosch fuel pump displacement is approximately 300ml per fuel pump)
Billet Components: Machined from aerospace grade 6061-T6 billet aluminium, designed using best practice engineering principles and stress tested to ensure maximum safety for all motorsport applications
Compatible Fuel Pumps
Walbro 520 / 525
please select either the Walbro or Bosch fuel bracket from the AVAILABLE OPTIONS above - "Fuel Pump Bracket"
PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump" or "Bosch Fuel Pump".
Need a Fuel Level Sender? Select from the AVAILABLE OPTIONS above "Fuel Level Sender".
Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above "Fuel Pressure Regulator".
Need the Correct Electrical Connector? High current draw fuel pumps such as the Walbro 460, and Walbro 520 require a high performance external e85 electrical connector. We've developed our own as the OEM Delphi Apex 2.8mm 6 way connector are NOT e85 compatible - two (2) connectors are required and ARE included FREE (includes 6x pins per connector and is compatible with 10 AWG & 12 AWG wire)
Need a Stainless Steel Fuel Filter (Walbro Pumps Only)? Aftermarket Industries developed the first and only 200 micron fuel filter / strainer designed for motorsport conditions and bio-fuels such as ethanol (e85): see AVAILABLE OPTIONS above - "Stainless Steel Walbro Fuel Filter" (select the desired quantity)
Package includes the following items:
75 Litre Fuel Tank
Billet FC1500 hanger (8AN ports)
6 way 90 degree male electrical connector kit (2x female connectors, 12x pins, circlip and o-ring)
Billet Triple fuel pump bracket (includes stainless steel fasterners and viton rubber insert) - please select either the Walbro or Bosch fuel pump bracket kit
One (1) set of two billet perforated spacers (additional spacers can be added at an extra cost - see above)
Billet push-lock adaptor fittings (please advise under checkout comments the number of fuel pumps that will be fitted to the FC1500 - we will provide the correct quantity of fittings and/or block off adatpers)
*Aftermarket Industries products are backed by the worlds largest specialised insurer; Lloyds of London
*These products are designed for race use only and must be correctly fitted by licenced automotive professionals or workshops. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.
*These tanks MUST not be pressurised, If you plan to use a high volume in-tank fuel pump you MUST use a-8AN fitting as the Overflow fitting located at the top of the surge tank. This will allow the fuel to return back to your fuel tank or fuel cell at the same rate fuel is supplied into the surge tank. Some vehicles may require modification of the OEM fuel pump assembly: If you are unsure, please complete the contact form and we will respond to yo