Currency
Currency:
Fuel Pump Hanger (FC1500-2XV-S Dual Venturi & Surge Tank) Single, Twin & Triple Fuel Pump

Fuel Pump Hanger (FC1500-2XV-S Dual Venturi & Surge Tank) Single, Twin & Triple Fuel Pump

Brand: Aftermarket Industries
Product Code: FC1500-2XV-S
Availability: In Stock
Price: $2,745.00AUD
Ex Tax: $2,745.00AUD

Available Options


Extra Hose:

Stainless Steel Fuel Pump Filter:

Hobbs Switch:

Power Distribution Kit:

Roll-Over Valve:

Fuel Level Sender:

* FC1500 Weld-on Flange:

Fuel Pressure Regulator: Horsepower Rating:

Walbro Fuel Pump:

* Fuel Filler Option:

24AN Female Hose Adaptor:

Qty:
Fuel Pump Hanger (FC1500-2XV-S Dual Venturi & Surge Tank) Single, Twin & Triple Fuel Pump Fuel Pump Hanger (FC1500-2XV-S Dual Venturi & Surge Tank) Single, Twin & Triple Fuel Pump

 

FC1500-2XV-S Billet Oval Fuel Pump Hanger Filler Options

Option A

(Fuel Cap)

$0

  • DEFAULT OPTION (FREE); For those that wish to fill directly via the FC1500 fuel pump hanger

Option B

(Hose Adapter)

$145

  • For those that wish to remote fill; compatible with a 54mm ID fuel hose

Option C

(24AN Adapter)

$145

 

FC1500-2XV-S Billet Oval Fuel Pump Hanger Special Features

Single Fuel Pump Port

  • 8AN fuel ports

  • Perfect fuel pressure control

  • Staged fuel pump operation

  • Superior fuel pressure stability due to our design protected 3-to-1 fuel pump manifold

Dual Venturi Pump

  • The FC1500-2XV-S (2x Venturi) is the worlds first fuel system to feature Dual Venturi Vacuum Pumps.
  • Developed in-house using leading CFD modelling software and techniques (200 data points, 250 man hours and 90 hours of continuous simulation)
  • The Dual Venturi Vacuum Pumps require no wiring, draw no current yet is able to generate enough vacuum to pull through, using two billet 3/8 quick connect weld-on fittings, up to 220 litres per hour of fuel into the billet tubes and deliver fuel into the fuel pump pick-up zone to ensure that the fuel pumps are submerged at all times and there is no possibility of fuel starvation or fuel surge.
  • The weld-on fittings must be located at the furthest point at the rear of the fuel tank
  • The e85 corrugated hoses provided are 250mm in total length (please measure accurately before final fitment/welding) - if you require longer hose please add additional hose length to your order - see AVAILABLE OPTIONS above - "Extra Hose" 

Surge Tank / Active Valve System
  • Active Valve System: The Fc1500 surge tank features the Aftermarket Industries Active Valve System; The AFVS are engineered to close and trap fuel under acceleration, cornering and breaking. The valves then open, when load is reduced, to allow fuel to rapidly re-fill the surge tank to eliminate fuel surge and/or fuel starvation.
Titanium Roll-Over Valve
  • The FC1500-2XV-S features a solid, light weight, titanium roll-over valve and billet valve retainer to provide critical safety protection in the event of a roll-over; the valve will stop fuel from exiting the fuel cell. See AVAILABLE OPTIONS above - "Roll-Over Valve"
Dual Vent/Breather
  • Dual 8AN vent/breather port for maximum venting under heavy load
  • Note: it is advised that tank is vented to charcoal canister and NOT atmosphere

Plug & Play

  • The FC1500-2XV-S features the Aftermarket Industries 6 way 30A (per pin) Plug & Play electrical connector to allow independent control of up to three fuel pumps.

Wiring Recommendation: Required For WARRANTY

Fuel Pump Qty Main Power Wire

Fuel Pump Power Wire

Relay Wire Size

Relay Size Fuel Pump Circuit Breaker
Single Pump 10 AWG Tefzel Mil-Spec 22759/34 10 AWG Tefzel Mil-Spec 22759/34 16 AWG Tefzel Mil-Spec 22759/16 35A-50A

25A-30A

Circuit Breaker or Fuse

Twin Pump 4 -6 AWG Main Wire Tefzel Mil-Spec 22759/16 (50A-60A Circuit Breaker/Fuse) 10 AWG Tefzel Mil-spec 22759/34 16 AWG Tefzel Mil-Spec 22759/16 50A 25A-30A Circuit Breaker or Fuse
Triple Pump 2-4 AWG Main Wire Tefzel Mil-Spec 22759/16 (80A Circuit Breaker/Fuse) 10 AWG Tefzel Mil-spec 22759/34 16 AWG Tefzel Mil-Spec 22759/16 50A 25A-30A Circuit Breaker or Fuse
  • Electrical Wire & Circuit Size Formula
    • Circuit Breaker/Fuse Size: 125% (1.25x) total Peak Current (Amps)
      • ​Circuit Breaker/Fuse must NOT exceed wire current rating
    • Wire Size: 150% (1.5x) total Peak Current (Amps)
    • Relay Size: 225% (2.25x) total Peak Current (Amps)

Bio-Fuel Compatible

  • Zero fuel vapour loss

  • Zero fuel smell GUARANTEED due to anodising process

  • Unleaded, Ethanol, C16

Engineering

  • Precision machined from aerospace grade 6061-T6 billet aluminium, designed using best practice engineering principles and stress tested to ensure maximum safety for all motorsport applications

Compatible Fuel Pumps

  • Walbro 255

  • Walbro 460

  • Walbro 520 / 525

  • PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump"

Compatible Fuel Tanks

  • Custom - may require the FC1500 billet aluminium weld-on flange

  • ATL 6x9 FIA-FT3 fuel tanks (please check minimum internal height before purchase: must be 10 inches)

  • Fuel Safe 6x9 FIA-FT3 fuel tanks (please check minimum internal height before purchase: must be 10 inches)

  • Most FIA-FT3 6x9 fuel tanks

Height Adjustable

  • Fuel pump height is adjustable between 254mm (10 inches) to 304mm (12 inches) internal depth/height

  • Baffle height is also adjustable

Power Support Table

Fuel Type
Fuel Pump
Power HP*
Peak Fuel Pressure PSI**
Voltage***
Ethanol

1x Walbro 460

500

70

13.5v-14v

Ethanol

 

1x Walbro 520/520

650*

70

13.5v-14v

Ethanol

2x Walbro 460

850*

75
13.5v-14v
Ethanol
2x Walbro 520/525
1200*
75
13.5v-14v
Ethanol 3x Walbro 460 1400* 80 13.5v-14v
Ethanol
3x Walbro 520/525
1500*
80
13.5v-14v

*BASE FUEL PRESSURE MUST BE SET @ 40 PSI OR LOWER

(Recommended Fuel Injector: Bosch Motorsport 1650cc)

**Total Peak Fuel Pressure (Base Pressure + Boost Pressure)

***Peak Voltage

Rotary Engine: Reduce Horsepower HP Support Figures by 30%

Need a Billet Oval Weld-On Flange? Machined from 6061-T6, the FC1500 billet weld-on flange is perfect for those that wish to fabricate their own fuel tank. see AVAILABLE OPTIONS above "FC1500 Weld-on Flange".

Need a Fuel Level Sender? Select from the AVAILABLE OPTIONS above "Fuel Level Sender".

 

FuelSale Fuel Sender

*PUMPS ARE NOT INCLUDED IN THIS PACKAGE: If you wish to add a fuel pump to your order please add the pump type and the quantity you require to your order from the AVAILABLE OPTIONS above - "Walbro Fuel Pump".
 

Walbro 460 (F90000274) Fuel Pump

Need a Fuel Pressure Regulator? We've made the decision easy and added the most suitable fuel pressure regulator based on the fuel pump selection to the AVAILABLE OPTIONS above "Fuel Pressure Regulator".

Turbosmart Regulator FPR2000

Need the Correct Electrical Connector? High current draw fuel pumps that require a high performance external e85 electrical connector. We've developed our own as the OEM Delphi Apex 2.8mm 6 way connector are NOT e85 compatible - two (2) connectors are required and ARE included FREE (includes 6x 10 AWG (30A) Metri-Pack 280 series pins per connector and is designed SPECIFICALLY for 10 AWG (30A) Tefzel Mil-Spec 22759/34 wire.

Aftermarket Industries 6 Way Connector (Female)

Need Power? Aftermarket Industries now offers a motorsport-grade Power Distribution Kit for up to 3 pumps (photo below is for promotional purposes only - kit requires assembly, cut & crimp) see AVAILABLE OPTIONS above - "Power Distribution Kit"

​​​Dual Relay Power Distribution Module (DIY)

​Do I Need To Stage My Fuel Pumps? YES! Fuel pump operation MUST be staged via a Hobbs Pressure Switch, Aftermarket ECU or PDM. See AVAILABLE OPTIONS above - "Hobbs Switch"

 

Hobbs Pressure Switch

Need a Stainless Steel Fuel Filter (Walbro Pumps Only)? Aftermarket Industries developed the first and only 200  micron fuel filter / strainer designed for motorsport conditions and bio-fuels such as ethanol (e85): see AVAILABLE OPTIONS above - "Stainless Steel Walbro Fuel Filter" (select the desired quantity)

Includes the following items: requires Assembly (estimated assembly time 30 minutes; assembly guide provided)

  • Billet FC1500 hanger (8AN ports)

  • 6 way 90 degree male electrical connector kit (2x female connectors, 12x pins, circlip and o-ring)

  • Billet Triple fuel pump bracket (includes stainless steel fasteners and viton rubber insert)

  • Two (2) billet swivel fittings

  • Dual billet venturi vacuum pump and surge tank kit (includes two (2) 3/8 billet quick connect fittings, four (4) 90 degree plastic quick connect hose adapters & two (2) 250mm e85 flexible corrugated hose kits with four (4) stainless steel hose clamps pre-assembled)

  • Baffle plate kit (includes two billet baffle plate adapters, laser cut baffle plate and stainless steel fasteners)

FREE FUEL SYSTEM ADVICE

Is all this too overwhelming? Don't worry, you're not alone!

BOOK NOW - CLICK HERE

Fuel System Advice (FREE)

*These products are designed for race use only and must be correctly fitted by licenced automotive professionals or workshops. Aftermarket Industries is not liable for personal injury, death or for any damaged whatsoever arising from any accident or incident where these conditions are not satisfied.

*Fuel tanks MUST not vent to the atmosphere AND is a fire hazard; a charcoal cannister.

*It is your responsibility to ensure that the Product is sufficient and suitable for your purposes and meet your individual requirements. We do not warrant that the Products will meet your individual requirements. You acknowledge that the Products are standard and not made bespoke to fit any particular requirements that you may have.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: